Filling The Rinse Aid Container - Blaupunkt 5VT7X00EME Bedienungsanleitung

FILLING THE RINSE AID CONTAINER

1
Lift the handle to remove the lid of the rinse
aid container.
3
Afterwards, close the cap.
Adjusting the rinse aid container
To achieve a better drying result with limited rinse aid, the dishwasher is designed to allow the user
to adjust the consumption of rinse aid. Follow these steps:
1. Open the door and switch on the appliance.
2. Within 60 seconds of pressing the power button, press the programme button for more than
5 seconds and then press the timer button to enter the set model. The rinse aid indicator will
flash at a frequency of 1 Hz.
3. Press the programme button to select the correct water softener according to your usage
habits. The settings change in the following order: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid your dishwasher will use.
4. Wait 5 seconds or press the power button to complete the setting and exit the setting mode.
2
Pour the rinse aid into the dispenser, taking
care not to overfill it.
20