Water Supply And Drainage - Blaupunkt 5VT7X00EME Bedienungsanleitung

Electrical requirements
Look at the type plate to check the rated voltage and connect the dishwasher to a suitable power
supply. Use the required 10A/13A/16A fuse, a time-delay fuse or a recommended circuit breaker
and provide a separate circuit that supplies power to this appliance only.
Electrical connection
Ensure that the voltage and frequency of the power supply correspond to the specifications on the
rating plate. Only insert the plug into a power outlet that has been properly earthed. If the power
outlet to which the appliance must be connected is unsuitable for the plug, replace the power outlet
instead of using an adapter or equivalent, as this may result in overheating and fire.
Ensure that the appliance is proper earthed prior to use.

WATER SUPPLY AND DRAINAGE

Cold water connection
Connect the cold water supply hose to a threaded 3/4 (inch) connector and make sure it is securely
attached. If the water pipes are new or have not been used for a long period of time, let the water
run to ensure that the water is clear. This precaution is necessary to avoid the risk of blocking the
water supply and damaging the appliance.
standard supply hose safety supply hose
Information on the safety supply hose
The safety supply hose consists of double walls. The hose system blocks the flow of water if the
supply hose ruptures and the air space between the supply hose and the outer corrugated hose is
filled with water.
33