Seite 1
Installations- und Gebrauchsanweisung Installation and operating instruction GUMMIERTE WÄRMEPLATTE...
Seite 2
Die Sicherheits- und Installations- 230 V / 50-60 Hz anweisungen sind unbedingt zu befolgen. 4. Sicherheits- und Gefahrenhinweise WP 025-035 0.25 x 0.35 m 15 W • Als Stromquelle darf nur eine 230 V ~ / 50-60 Hz Netzsteckdose des öffentlichen WP 030-060 0.30 x 0.60 m...
Seite 3
• Wenn anzunehmen ist, dass ein gefahrloser 5. Installation Betrieb nicht mehr möglich ist, so ist das Bei Verwendung in Feuchträumen (z.B. Ge- Gerät außer Betrieb zu setzen und gegen wächshaus) darf das Gerät nur an Steckdosen unbeabsichtigten Betrieb zu sichern. betrieben werden, die über einen FI-Schutz- schalter abgesichert sind.
Seite 4
Aufbau: Fällen nicht ausreichend, um einen plötzlichen Breiten Sie die Wärmeplatte vollständig Sturz der Umgebungstemperatur abzufangen. aus. Hinweis: Stets die Matte ganzflächig Dies muss mit einem zusätzlichen Frostwäch- abrollen,ansonsten besteht die Gefahr ter erfolgen. eines Defektes. Zum Schutz der Wärmeplatte überdecken ACHTUNG: Sie sie mit einer zusätzlichen Styropor- Belasten Sie die Wärmeplatte niemals...
Seite 5
über technische Arbeitsmittel sowie der geltenden Unfallverhütungsvorschriften. Bitte füllen Sie im Garantiefall die hierfür bei- gelegte Garantie- und Infokarte aus! Sollten Sie noch Fragen haben, so wenden Sie sich an unseren Bio Green-Service: Tel.: +49 (0) 6444 / 9312-0 oder Email: info@ biogreen.de...
Seite 6
Power supply:230 V / 50-60 Hz • If you are unsure about operation, safety or connection of the appliance, please consult a specialist. WP 025-035 0.25 x 0.35 m 15 W • This appliance is for indoor use only. • The appliance must be unplugged from WP 030-060 0.30 x 0.60 m...
Seite 7
Industrial Employer’s Liability Insurance Asso- Set up: ciation are to be observed. Spread the warming plate fully. Note: Always fully unroll the mat, to • Never spill fluids on the appliance – danger avoid risk of damage. of fire or lethal electric shock. If this should Cover the warming plate with a plastic nevertheless transpire, unplug the mains sheet for additional protection.
The temperature (0 – 40 °C) is set via the ther- warranty (effective from the date of purchase) mostat adjusting knob. Each division between on all Bio Green products. Damages arising 0 and 5 represents a temperature difference of from external force, improper use as well as approx.