Fifine K669 Bedienungsanleitung Seite 5

3.Select the Recording tab, and choose "USB PnP Audio Device" as the default device. When
you speak to mic, bar-type icon will turn green and bounce. If it remains unchanged, please
reset computer and replug in the USB port. If there's still no "USB PnP Audio Device" ,please
contact our customer service.
If you want to monitor your recording, click Microphone "Realtek High De nition Audio"-
"Properties"- "Listen"- click "Listen to this device"-"Apply". No sound can be heard through
earphone/speaker, if you don't follow this procedure.
NOTE: Click o listen to myself when you are using any recording software or chatting
software(Skype).
7
4. Double click on the "USB PnP Audio Device" icon to open the Microphone Properties
window. Select the Levels tab to adjust microphone level (loudness).
Note:(Applicable for MAC and Windows)
1. If computer prompts that it's unable to identify USB devices, please restart computer and
replug the microphone into other USB port.
2. If mic recognized but no sound comes out, please check whether System Sound is mute
and whether you have turned volume control on microphone to minimum.
3. if mic recognized but not sound out, and your computer runs windows 10, please go to
settings>privacy>microphone and click the Allow apps to access the microphone to ON
then restart.
Recording Software Settings
1. Make sure you have the correct input/output selected. Notice: logging out of AUDACI-
TY(or other recording software) if you nd USB microphone is unavailable. And then plug in
mic rst ,secondly log in software again.
8