Laserworld RTI ATTO Series Bedienungsanleitung Seite 8

Manual: RTI ATTO Series
7. Key Switch
There is a key switch on the rear side of the device. Please connect the key with the
switch and turn it on. The laser device only runs when the key is inserted and switched
on.
Prevent misuse! Unplug the key when the laser is unattended to prevent misuse of
the system!
8. Safety Presets
This device has a preset active Scan Fail Safety.
9. Turn off
To turn off the device disconnect the power cable from the mains.
Important Note:
Operate scanners/galvos only at appropriate speed according to the res-
pective scan angle. Too high scan speed will damage the scanning system.
page 8 / 27