Herunterladen Diese Seite drucken
HANSGROHE Aquno Select M81 170 3jet sBox 73831 3 Serie Gebrauchsanleitung, Montageanleitung
Vorschau ausblenden Andere Handbücher für Aquno Select M81 170 3jet sBox 73831 3 Serie:

Werbung

EN Instructions for use ⁄ assembly instructions
DE Gebrauchsanleitung ⁄ Montageanleitung
2
3
Aquno Select M81 170 3jet sBox
73831XX3

Werbung

loading

Inhaltszusammenfassung für HANSGROHE Aquno Select M81 170 3jet sBox 73831 3 Serie

  • Seite 1 EN Instructions for use ⁄ assembly instructions DE Gebrauchsanleitung ⁄ Montageanleitung Aquno Select M81 170 3jet sBox 73831XX3...
  • Seite 2: Safety Notes

    • The plumbing codes applicable in the respective 80 = Stainless Steel Optic countries must be observed. Special accessories (order as an extra) • If the SatinFlow starts to drip or run with it, the flow rate of the angle valve on the hot water side must be extension #43333000 (see page 15) regulated downwards. Cleaning (see page 16) Technical Data Operating pressure: max. 0,45 MPa Operation (see page 13) Recommended operating pressure: 0,1 - 0,45 MPa Hansgrohe recommends not to use as drinking water Test pressure: 1,6 MPa the first half liter of water drawn in the morning or after (1 MPa = 10 bar = 147 PSI) a prolonged period of non-use. Hot water temperature: max. 60°C Thermal disinfection: 70°C / 4 min The product is exclusively designed for drinking water! Symbol description Do not use silicone containing acetic acid! Adjustment (see page 12) To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.
  • Seite 3 Sonderzubehör Technische Daten (nicht im Lieferumfang enthalten) Betriebsdruck: max. 0,45 MPa Verlängerung #43333000 (siehe Seite 15) Empfohlener Betriebsdruck: 0,1 - 0,45 MPa Prüfdruck: 1,6 MPa Reinigung (siehe Seite 16) (1 MPa = 10 bar = 147 PSI) Heißwassertemperatur: max. 60°C Bedienung (siehe Seite 13) Thermische Desinfektion: 70°C / 4 min Das Produkt ist ausschließlich für Trinkwasser konzipiert! Hansgrohe empfiehlt, morgens oder nach längeren Stagnationszeiten den ersten halben Liter nicht als Symbolerklärung Trinkwasser zu verwenden. Kein essigsäurehaltiges Silikon verwenden! Störung Ursache Abhilfe SatinFlow zu gering / wenig - Düsen und / oder Durchflussbe- - Düsen und Durchflussbegrenzer Wasser grenzer verschmutzt / verkalkt ausbauen und reinigen. Umstellung auf SatinFlow klemmt - Umstellknopf verschmutzt - Umstellknopf entfernen und reinigen Armatur tropft...
  • Seite 4 (3 Nm) (3 Nm) SW 10 mm SW 19 mm SW 24 mm (4 Nm) (4 Nm) 150° 60° 110°...
  • Seite 5 150° 75° 75° 24 x 15° 105° 45° 105° 45°...
  • Seite 6 110° 55° 55° 110° 24 x 15° 85° 25° 85° 25°...
  • Seite 7 60° 30° 30° 60° 24 x 15° 45° 15° 45° 15°...
  • Seite 8 SW 22 mm 96507000 (450 mm) SW 19 mm (4 Nm) SW 22 mm SW 17 mm SW 22 mm SW 17 mm (8 Nm)
  • Seite 10 max. ± 20°...
  • Seite 11 max. ± 20° 43333000 max. ± 20°...
  • Seite 12 60 °C 10 °C 0,3 MPa SW 3 mm 60°C 36°C 55°C 38°C 50°C 43°C SW 3 mm (5 Nm)
  • Seite 13 open / öffnen close / schließen hot / warm cold / kalt...
  • Seite 14 Ø 2 5 14 4 19 0 2 2 0 Ø 3 4 G3/8 G3/8 G1/2 m a x . 4 5 15 8 2 5 0 G3/8 4 2 6 4 0 0...
  • Seite 15 0,60 0,55 0,50 0,45 0,40 0,35 0,30 0,25 0,20 0,15 0,10 0,05 0,00 Q = l/min 9 12 15 18 21 24 27 30 Q = l/sec 43333000...
  • Seite 16 Cleaning recommendation / Warranty / Contact Reinigungsempfehlung / Garantie / Kontakt QUICK Just clean: simply rub over the spray nozzles to remove lime scale. CLEAN Einfach sauber: Kalk lässt sich von den Noppen ganz leicht abrubbeln. www.hansgrohe.com/ www.hansgrohe.com/ www.hansgrohe.com/ cleaning-recommendation cleaning-recommendation cleaning-recommendation www.hansgrohe.com/ www.hansgrohe.com/ cleaning-recommendation cleaning-recommendation www.hansgrohe.com/ cleaning-recommendation...
  • Seite 17 SW 2 mm SW 2 mm (0,6 Nm)
  • Seite 18 SW 12 mm SW 24 mm...
  • Seite 19 43333000 40963000 93779XX0 98112000 (8x2) 93778XX3 93754000 (1850 mm) (150°/1 10°/60°) 95910000 96507000 98426000 (450 mm) (19x2) 93342000 93776XX0 96099000 93183000 92926000 98365000 98170000 (10x2) 93782000 93781XXX 93841000 93558000 (M4x12) 97548000 97523000 95049000 97827000 (8x1,75) 93777XX0 93780000 (900 mm) 93395000...
  • Seite 20 Hansgrohe · Auestraße 5 - 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com...