Philips HD7892 Bedienungsanleitung Seite 8

English
10
14 Remove the filter holder from the insulated jug (Fig. 19).
Tip: You can place the filter holder on the drip tray to prevent coffee from leaking onto your
worktop while you pour out coffee from the jug (Fig. 20).
15 Place the jug lid on the insulated jug and turn it to the keep-warm position (closed lock symbol)
(Fig. 21).
16 Push the lever of the jug lid to pour coffee into one or more cups, (Fig. 22)
Brewing pod coffee
Brewing one cup of pod coffee
1 Fill the water reservoir with clean cold water up to the MAX indication and put it back onto the
machine (Fig. 3).
Note: The MIN indication on the water reservoir indicates the minimum amount of water required
for brewing pod coffee. Always fill the water reservoir beyond the MIN level.
2 Put the plug in an earthed wall socket.
3 Open the lid of the machine by moving the lever upwards (Fig. 9).
4 Place the drip tray on the platform of the machine (Fig. 23).
5 Place one pod in the 1-cup pod holder with the convex side pointing downwards (Fig. 24).
Note: Make sure that the pod holder is clean and the sieve in the center is not clogged, e.g. with
loose coffee grounds.
Note: Make sure that the coffee in the pod is distributed evenly and press the pod lightly into the
pod holder.
6 Place the 1-cup pod holder in the machine and close the lid (Fig. 5).
7 Place a cup on the drip tray (Fig. 25).
8 Press the 1-cup button to brew coffee. (Fig. 26)
-
The button starts flashing and the machine starts heating up (Fig. 27).
-
When the heating-up process is finished, the machine starts brewing coffee (Fig. 28). After
brewing, the machine switches off automatically.
9 Remove the coffee pod after use by lifting the pod holder out of the machine and emptying it (Fig.
10).
Caution: Be careful when you do this, for there may still be some hot water/coffee on the coffee
pod(s).
Caution: Never put normal ground coffee or use torn pods in the machine, as this causes it to
become blocked.
Brewing two cups of pod coffee
1 To brew two cups of pod coffee,place the deeper 2-cup pod holder in the machine. Place two pods
in the 2-cup pod holder (Fig. 29).
2 Press the 2-cup button to brew coffee (Fig. 30).
-
The button starts flashing and the machine starts heating up (Fig. 31).
-
When the heating-up process is finished, the machine starts brewing coffee (Fig. 32). After
brewing, the machine switches off automatically.
3 Remove the coffee pods after use by lifting the pod holder out of the machine and emptying it (Fig.
33).