First Use - Philips HD7892 Bedienungsanleitung

Electromagnetic fields
This Philips machine complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

First use

The machine starts an automatic flushing cycle when you switch it on for the first time, no matter
which button you press.
1 Put the plug in an earthed wall socket.
2 Remove the water reservoir from the machine and remove the lid from the water reservoir (Fig. 2).
3 Clean the water reservoir thoroughly in hot water, if necessary with some washing-up liquid.
4 Fill the water reservoir with clean cold water up to the MAX indication (Fig. 3).
5 Put the lid back onto the water reservoir and put the water reservoir back onto the machine (Fig. 4).
6 Place the 1-cup pod holder in the coffee machine. Close the lid and make sure it is properly locked
(Fig. 5).
7 Remove the drip tray from the platform and put a bowl (with a capacity of at least 1 liter) or the jug
under the coffee outflow (Fig. 6).
8 Press one of the buttons on the control panel. All three lights start flashing (Fig. 7).
9 The flushing cycle starts. During the flushing cycle the system fills itself with water from the water
reservoir. The machine produces more noise than during a regular brewing cycle.
10 The machine switches off when the water tank is empty (Fig. 8).
11 After the first flushing cycle, clean the collector ring and the pod holder with hot water and some
washing-up liquid or in the dishwasher. Rinse the insulated jug under the tap.
Brewing a jug of drip-filter coffee
1 Open the lid of the machine (Fig. 9).
2 Remove the pod holder, if present (Fig. 10).
3 Remove the drip tray, if present.
4 Fill the water reservoir with clean cold water up to the level required for the number of cups of
coffee you wish to brew and put the water reservoir back onto the machine (Fig. 11).
5 Rinse the insulated jug with hot tap water to preheat it .
Tip: To obtain the tastiest and hottest coffee, brew at least half a jug of coffee.
6 Place the filter holder on top of the insulated jug (Fig. 12).
7 Open the lid of the filter holder.
8 Put a paper filter size 102 in the filter holder. Make sure that you fold the sealed edges to ensure
that the paper filter stays upright during brewing (Fig. 13).
9 Use the measuring spoon to put the required amount of pre-ground coffee in the filter (Fig. 14).
Tip: Use one measuring spoon of pre-ground coffee for each cup. Use a heaped measuring spoon
for strong coffee and a level measuring spoon for mild coffee.
10 Close the lid of the filter holder.
11 Slide the insulated jug on the platform of the machine (Fig. 15).
12 Press the jug button to start the brewing process (Fig. 16).
-
The light in the jug button starts flashing and the brewing process starts. (Fig. 17)
-
When all the water from the water reservoir has passed through the filter, the light in the jug
button goes out and the machine switches off automatically.
13 You can now remove the insulated jug from the machine (Fig. 18).
English
9