Safety Instructions For Maintenance; Troubleshooting - Gastrodomus GK413VSB Handbuch Zur Installation, Bedienung Und Wartung

the surface.

To make cleaning easier, the glass door can be removed. Clean it using a mild cleaning
agent and soft cloth, then dry thoroughly.

Wash the exterior of the device with a soft cloth and warm water, with a small amount
of mild detergent.

Rinse all the washed surfaces with clean water to remove leftover cleaning agents.

Wash the GN containers thoroughly.

Never use harsh cleaning chemicals, such as scouring powder, alcohol-based substances
or solvents, which may damage the device's surface.

Dry the device thoroughly. Use a soft, dry cloth for drying and polishing the device's
surface.
When the device is not in use over longer periods:

Disconnect the device from the power plug (pull the plug out socket!);

Remove all foods from the refrigerated display;

Clean the inside and outside of the refrigerated showcase according to the directions
above;

rinse with clean water and thoroughly dry the device;

leave the sliding glass door in the open position, so that the device to dry completely.

Safety instructions for maintenance


Check the mains lead from time to time to ensure it isn't damaged in any way. Never
use the device if the lead is damaged. If the lead is damaged it must be replaced by a
qualified electrician.

In case of damage or malfunction, please contact your retailer or our customer service
centre.

Only a qualified technician and using original spare parts and accessories should carry
out repairs and maintenance of the device. Do not attempt to repair the device yourself.

7. Troubleshooting

Problem
Cooling effect
insufficient.
21
Cause
• Heat source too close or
device exposed to direct
sunlight.
• Bad air circulation
around the device.
• Temperature set
improperly.
• Device is overfilled.
Solution
• Ensure sufficient space between
device and heat source.
• Ensure sufficient space between
device's walls and other objects.
• Check settings, set a lower
temperature.
• Do not overfill device, remove
excess products.
- 21 -