Operation - Gastrodomus GK413VSB Handbuch Zur Installation, Bedienung Und Wartung

substances on the Refrigerated showcase.
• Never put any heavy load on the top of the refrigerated showcase.
• Position the device in a way so that the power plug is always accessible.

Operation

• Before connecting it to the power source, wash it. GN containers should be washed prior
to use. (see 6. "Cleaning").
• Open the sliding door and place the GN containers in the device.
• Connect the device to a single grounded outlet.
• Turn the device on by using the ON/OFFswitch.
• The digital display will show the set temperature value and the LED cooling indicator will
come on (flashing) and the compressor will start with a delay.
• The device should reach the desired temperature before food products in GN containers
are placed inside.
Temperature adjustment
11 – LOWER temperature
12 – RAISE temperature
13 – COMPRESSOR light
14 – DEFROST light
15 – LIGHTING button
16 – SET button
17 – Temperature
Pic. 2
The device's temperature can be set within a range from de 2 °C to 7 °C.
To set or change the desired value:

press the button labeled

raise or lower the temperature as desired by pressing the buttons labeled

confirm the set temperature by pressing the button labeled
Lighting
To turn on and off the light, please use the button
LCD indicators
COMPRESSOR (13 pic.2): this indicator comes onwhen the compressor is activated and goes off
when the desired temperature is reached.
DEFROST (14 pic.2): this indicator comes on during the defrost process and goes offwhen the
defrost process is finished.
19
, the current value will begin flashing;
.
.
and ;
- 19 -