Cleaning And Maintenance; Safety Advice; Cleaning - Gastrodomus GK413VSB Handbuch Zur Installation, Bedienung Und Wartung

Defrost
The device has an automatic defrost function.. If the cooling power should decrease, it will be
necessary to activate a manual defrost:
• To activate it, press the LIGHTING button
During defrost the DEFROST light will show (14 pic.2).
Notes for optimal use
• When the device's interior has reached the desired temperature, the LED cooling
indicator will go off and the device is ready for food products to be placed inside. To do
this, first open the glass door at the rear of the device.
• Food products (e.g. sushi, tapas) ready to be served should be placed in appropriate GN
containers, which are then placed in the cooling cabinet.
• Do not place hod food inside the cooling cabinet, but let it cool first.
• Do not overfill the cooling cabinet, so as to avoid disrupting air circulation inside the
device.
• To avoid losses during the cooling process, do not keep the glass door open longer than
is necessary.
• After removing the desired food products, close the device's glass door.
• If the device is to remain unused for a period of time, turn it off using the ON/OFF switch
and remove the device's plug from its socket.

6. Cleaning and maintenance

Safety advice


Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.

Do not use any acid agents and make sure no water ingresses the device.

To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
The device is not designed to be directly sprayed off with a water jet. Hence, you must not
use pressure water jets for the cleaning of the device!

Cleaning


At the end of the day the device should be thoroughly cleaned.

Disconnect the device from its socket by removing the plug.

Remove all food from inside the device and place it in a refrigerator, to avoid spoilage.

If condensation has gathered on the surface for placing GN containers, remove is using
the drain hose. First, remove the cover from the drain hose, then pour the water into a
container. Close the drain hose.

Regularly clean the interior of the cooling cabinet with a disinfectant approved for food
service use and a soft cloth.

After the cleaning procedure you should use a soft and dry cloth to wipe dry and polish
- 20 -
for 6 seconds.