Landxcape LX992 Benutzerhandbuch Seite 16

4.4 How efficiently will my Landxcape
mow the grass?
Mowing times are different for every lawn depending on the factors
mentioned below. Gradually adjust the time you allow Landxcape
mow each day until you find the most suitable setting.
TM
Your Landxcape is capable of mowing areas of different sizes,
although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the cutting blades
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
Unlike most other mowers, Landxcape
which is able to cut the surrounding grass as much as possible. The holes
on the bottom of the charging base allow the grass to grow through the
base to help disguise it and create an elegant appearance.
TM
Landxcape 's cutting height can be adjusted (refer to the Technical Data
& Declaration of Conformity for specific cutting height range). Before
TM
starting your Landxcape for the first time, you should cut the grass to
the height no more than 9 cm with your manual lawnmower. Then, set the
TM
cutting height of your Landxcape
mowing. (See Fig. F)
TM
Your Landxcape will cut best in dry weather.It is also feasible to let
TM
your Landxcape work on rainy days as long as the lawn is solid.
Check and clean your mower regularly.
TM
Your Landxcape is afraid of lightning storms. In case of a lightning
TM
storm, protect Landxcape by unplugging the charging base,
disconnecting the boundary wire, and making sure Landxcape
allowed to charge.
TM
Your Landxcape loves mowing grass and requires the cutting blades to be
kept in good condition to cut at its best. Landxcape
by itself, but will sometimes need your help to prevent damage to itself.
TM
• Never let Landxcape travel over gravel.
• Remove or prevent access to obstacles that Landxcape
accidentally climb on and damage its blade turning disc.
• Remove all debris and foreign objects from your lawn.
5. App (only for specific model,
please check Technical Data &
Declaration of Conformity)
TM
Your Landxcape is able to connect with smartphone. Using Landxcape
App for your smartphone, you can change your Landxcape
settings, and view the machine's status and error messages.
Checklist before connecting your App to Landxcape
Step 1: Check your smart phone
1. Make sure the Wi-Fi that your smart phone connected is 2.4GHz
instead of 5GHz.
Example:
2. Make sure the APP installed on your smart phone is the latest version.
Step 2: Check your Landxcape TM
TM
1. Make sure your Landxcape is under the same router environment
as your smart phone.
2. Make sure the firmware on your Landxcape
3. Make sure the distance between your Landxcape
16
TM
TM
TM
uses a side charging system,
to its maximum setting for its first time
TM
is not
TM
can do most things
TM
could
TM
's general
TM
TM
is the latest version.
TM
and smart phone
is as close as possible during connection (less than 3 meters).
4. Make sure the distance between your Landxcape
close as possible during connection (less than 3 meters).
Step 3: Check your router
to
1. Make sure your router is 2.4GHz or 2.4GHz mixed 5GHz, and please
enable 2.4GHz band.
2. Make sure your router 802.11 mode of wireless setting is b/g/n
mixed. (See Fig. 1)
3. Make sure your router channel/ band width of wireless setting is
Auto or 20M or 20M mixed 40M. (See Fig. 1)
4. Make sure your router Enable the SSID Broadcast function when
you connect the machine with the APP. And you can close it after you
connect successfully. (See Fig. 1)
5. Make sure DHCP function is enabled. (See Fig. 2)
6. If you have a "Fritz!box" Router, please make sure activate "Allow
communication between devices in same network" in the settings.
7. Mare sure Port 8883 TCP is open. If it's blocked (See Fig. 3), please
modify the setting.
To connect smartphone to your Landxcape
TM
Step 1: To download the Landxcape
download it from Playstore (Google-Android), AppleStore (Apple-iOS) or
our website www.landxcape-robotics.com.
Step 2: Keep pressing
Use or to choose the icon
Only for reference
TM
and router is as
TM
:
TM
App, scan the QR code below or
for 3 seconds, the icon will be blinking.
, then press to confirm.
Fig. 1
Fig. 2
Fig. 3
EN