Malfunctions - Siemens EQ.500 classic TP5 Serie Gebrauchsanleitung

Malfunctions

Fault
Appliance no longer re-
sponds.
Appliance only dispenses
water, not coffee.
Appliance is not dispensing
milk froth.
No milk intake by the milk
system.
Milk froth is too cold.
Appliance is not dispensing
hot water.
Cause
Appliance has a fault.
Empty bean container is not
detected by the appliance.
Coffee shaft on brewing unit
is blocked.
Beans are too oily and are
not falling into the grinder.
Brewing unit is not inserted
properly.
Milk system is soiled.
Milk tube not immersed in
milk.
Heavy build-up of limescale
in the appliance.
The milk system is as-
sembled incorrectly.
Milk tube not immersed in
milk.
Milk is too cold.
Milk system is soiled.
Troubleshooting en
troubleshooting
Pull out the mains plug and wait
1.
10 seconds.
Re-insert the mains plug.
2.
Pour in coffee beans.
▶
Clean the brewing unit.
▶
→ "Cleaning brewing unit", Page 63
Gently tap the bean container.
▶
Change the coffee variety.
▶
Do not use oily beans.
Clean the empty bean container
▶
with a damp cloth.
Slide the brewing unit right back.
▶
Clean the milk system in the dish-
▶
washer.
→ "Cleaning the milk system",
Page 62
Use more milk.
▶
Check whether the milk tube is im-
▶
mersed in the milk.
Descale the appliance.
▶
→ "Using the descaling pro-
gramme", Page 65
Assemble the milk system cor-
▶
rectly.
→ "Cleaning the milk system",
Page 62
Use more milk.
▶
Check whether the milk tube is im-
▶
mersed in the milk.
Use lukewarm milk.
▶
Clean the milk system in the dish-
▶
washer.
→ "Cleaning the milk system",
Page 62
69