Clock Functions - AEG BPS33102ZM Benutzerinformation

10 www.aeg.com

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock func-
tion
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
00:00
COUNT UP
TIMER
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
minutes.
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven
turns off. Use only when a
heating function is set.
Combination of DURA-
TION and END function.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
If you do not set any oth-
er clock function the
COUNT UP TIMER auto-
matically monitor how
long the oven works.
It is on immediately when
the oven starts to heat.
The Count Up Timer can-
not be used with the
functions: DURATION,
END.
and
or to set the hours.
to confirm and set the
The display shows
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
then the hours. Press
When the set Duration time ends the
signal sounds for 2 minutes.
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Press or to set the hours and
then the minutes. Press
confirm.
At the set End time the signal sounds for
2 minutes. and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
and the set
to confirm.
and time
to