To Use Your In-Bowl Illumination - Kenwood TITANIUM CHEF XL KVL80 Bedienungsanleitungen

To use your
in-bowl illumination
• Your Stand Mixer is fitted with an in-bowl
illumination feature
underside of the mixer head.
• To turn on and off, lightly press the
in-bowl illumination touch pad
To remove and fit
outlet covers
High-speed outlet cover
1 To remove the cover, use the grip on the
side and lift upwards.
2 To fit, place the cover over the outlet and
push downwards.
Slow-speed outlet cover
1 To remove the cover, use the grip on the
underside and pull outwards.
2 To fit, locate the catch at the top of the
cover into the outlet recess and push to
clip into position.
located on the
.
To fit and use
your Splashguard
To assemble
The splashguard assembly consists of
2 pieces: the head shield
splashguard
The splashguard cannot be fitted to the
bowl unless the shield is fitted.
1 Raise the mixer head until it locks.
2 Clip the head shield upwards onto the
underside of the mixer head
located.
3 Fit the bowl onto the base.
4 Lower the mixer head.
5 Rest the splashguard on the bowl rim
and then slide forward until fully located
.
• During mixing, ingredients can be added
directly to the bowl via the feed chute.
6 To remove the splashguard simply slide
it away from the mixer bowl.
7 To remove the head shield, raise the
mixer head until it locks. Remove the
tool if fitted, then pull the head shield
downwards from the underside of the
mixer head.
Note: Only fit or remove the splashguard
when the mixer head is in the locked
position.
We recommend that the head shield
is removed regularly from the mixer
head for cleaning.
8
and the
.
until fully