Fein KFH17-8 Bedienungsanleitung Seite 23

Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Do not touch the rotating parts of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Switching on
Switching off
Locked
Not locked
Product with double or reinforced insulation
~ (a. c.) Alternating current
Low speed
High speed
Type: indexable insert
Copper paste (Cu)
en
23