Safety Instructions; Conformity With Standards And Regulations; Function Of Residual Current Circuit-Breaker Type 8562/5 - Stahl 8562/5 Betriebsanleitung

3

Safety Instructions

The most important safety instructions are summarized in this section. They supplement
the corresponding regulations which the staff responsible must study.
When working in areas, subject to explosion hazards, the safety of personnel and plant
depends on complying with all relevant safety regulations. Assembly and maintenance
staff working on installations therefore have a particular responsibility. They require
precise knowledge of the applicable standards and regulations.
As a user, please observe:
 national safety and accident prevention regulations,

national assembly and installation regulations (e.g. IEC/EN 60079-14),
 generally recognised technical regulations,
 safety instructions and information in these operating instructions,

characteristic values and rated operating conditions on the rating and data plates,

instruction plates on the unit,
 that any damage can invalidate the Ex-protection.
Use the miniatur circuit-breakers in accordance with their designated use and for their
intended purpose only (see "Function of Residual Current Circuit-Breaker type 8562/5"
on page 3). Incorrect or impermissible use or non-compliance with these instructions
invalidates our warranty provision. No modifications or alterations to the devices
impairing their explosion protection are permitted. The miniatur circuit-breakers must only
be fitted and operated if they are undamaged, dry and clean.
4

Conformity with standards and regulations

See certificates and EC Declaration of Conformity: www.stahl-ex.com
5

Function of Residual Current Circuit-Breaker Type 8562/5

The series 8562 residual current circuit-breaker protects personnel in hazardous areas.
With its very short switch-off time, it switches off electrical equipment when the tripping
current is exceeded. It is designed for fitting into an enclosure with type of protection
increased safety „e".
149912 / 8562605300
2013-05-21·BA00·III·en·05
Safety Instructions
Residual current circuit-breaker
8562/5
3