Wolkenstein WMOC 7P-DO Bedienungsanleitung Seite 114

Proper positioning of the trays is mandatory for safe
operation of the appliance. Otherwise hot food or
cookware can slide off the trays when removing them.
A
FTER THE CONNECTION OF THE APPLIANCE TO THE MAINS
When you connect the appliance to the mains for the first time, all indicators are
on for approx. one second. The display indicates « 12:00 », the hour indicator
« 12 » and the corresponding indicator «
» is on. You can set the current time now; s. chapter 4.3.3 S
TIME
/
THE TIME SYSTEM TIME
the minute setting after approx. 10 seconds without using any operating buttons.
If still no time setting is carried out, the appliance returns to
fig. below) automatically after another 10 seconds without using any operating
buttons; s. chapter 4.3.2 S
Before you can use the oven generally, you must set the time / system
time.
S
❖ The appliance also starts a self-test of the automatic door locking. During the
self-test, the door lock closes and opens automatically. If no error code is
displayed within 20 seconds, the self-test of the door locking is completed
successfully.
If the error code « E-3 » is indicated on the display during the self-test: see chapter
8.1 E
RROR CODES
Press the button «
code. The appliance returns to
. If the time (hours) is not set, the appliance changes to
TANDBY MODE
-
ELF TEST OF THE AUTOMATIC DOOR LOCKING
.
/
PAUSE CANCEL
STANDBY MODE
» flash; the indicator «
.
» to cancel the indication of the error
automatically.
~ ~
114
/
TIME SYSTEM
ETTING OF
(s.
STANDBY MODE