Herunterladen Inhalt Inhalt Diese Seite drucken

cecotec HidroBoost 2400 Bedienungsanleitung Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
ENGLISH
damage.
Do not operate the pressure washer without the anti-
impurities water inlet filter. Make sure to keep the filter
clear of debris and sediment.
This machine has been designed for use with the specific
pressure washer soaps. It is suggested to use specific soaps
for each type of surface (NOT INCLUDED).
The use of other cleaning agents or chemicals may adversely
affect the safety of the machine.
Never operate pressure washer with broken or missing
parts. Check equipment regularly and repair or replace
worn or damaged parts immediately.
To ensure a safe operation, use only original spare parts
provided or approved by Cecotec.
Use only the nozzle supplied with this machine.
Never leave the high-pressure hose unattended while the
machine is running.
Always hold the high-pressure hose and gun firmly when
starting and operating the machine.
Never allow the unit to run with the trigger released (off)
for more than one minute, this could cause damage to the
pump.
The device is not designed to pump hot water. Do not
connect it to a hot water supply as it will significantly reduce
the pump's service life.
The machine is not suitable for connection to potable water
mains.
Make sure the inlet water pressure is between 0.01MPa and
0.4MPa and the inlet pipe should at least 5-metre long.
If the machine is going to be connected to a safe drinking
water mains, install a backflow preventer in the water
pipe to prevent dirty water flow back to the drinking water
system. The backflow preventer shall comply with EN
60335-2-79 ANNEX A.
22
HIDROBOOST 2400 HOME&CAR
This appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit
that is regularly switched on and off.
Release the trigger when changing from high to low
pressure modes.
Keep the high-pressure hose away from sharp objects.
Bursting high-pressure hoses may cause injury. Examine
high-pressure hoses regularly and replace it if damaged.
Do not attempt to mend a damaged high-pressure hose.
To reduce the risk of electrocution, keep all connections dry
and off the ground. Do not touch plug with wet hands.
Do not use pressure that exceeds the operating pressure
of any of the parts (high-pressure hoses, fittings, etc.) in
the pressurized system. Ensure all the equipment and all
accessories are rated to withstand the maximum working
pressure of the unit.
Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when
the appliance is being used by or near children.
This appliance cannot be used by children or persons with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge.
WARNING:
Servicing of a double-insulated machine:
In a double-insulated machine, two systems of
insulation are provided instead of grounding. No
Fig. 1
grounding means are provided for a double-insulated
machine, nor should grounding means be added to the machine.
Servicing a double-insulated machine requires extreme care
and knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a double-
ENGLISH
23
HIDROBOOST 2400 HOME&CAR

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis