VITINNI JK08014101 Bedienungsanleitung Seite 19

Line Feeding
Line feeding is automatic. When you start the trimmer, the line will automatically cut
to the right length.
Replacement Of The Line Spool
• Push the clips (b) of the spool holder (a) both side down and pull it out.
• Remove the empty spool (c) and clean the inside of the spool holder carefully
removing all dust and grass residues.
• Insert now the new spool in the spool base and push the end of line through the
lateral holes (d).
• Push the spool holder (a) on and fasten it securely.
C
AUTION! Under no circumstances wind extra line on the empty spool but
instead replace it with a new one, the same as the original. The use of line
with different characteristics to those of the original can permanently damage
the grass trimmer as well as annulling the terms of the guarantee.
18