Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjusting the Working Angle
The trimmer head has 5 positions. Press and hold the turn knob (12) and rotate the
trimmer head to the desired position. (Fig.13)
You can choose the working angle according to the various ground conditions.
(Fig.14-15)
Operation
Before starting work, make sure that the area to be cut is free of stones, debris,
wires and any other objects. Hold the grass trimmer with both hands.
Do not cut damp or wet grass.
1. Push locking button right or left, then activating on/off switch to start the machine.
Then release locking button. To stop the machine, simply release the on/off switch.
(Fig.16)
2. Allow the trimmer to run for a few seconds without touching the work surface in
order to allow the blade on guard to cut the line.
3. While using the trimmer, keep it at an angle of approximately 20° to the ground
(Fig. 17) and move it from side to side. (Fig.18).
16
Werbung
