Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To remove the battery pack, just press the release button (a) and pull it out.
Preparing the trimmer before use
Before carrying out any adjustment, remove the battery pack.
Before use, check that the tool is in good working order and that the length of the
trimmer line is correct, as follows:
1. Ensure the switch is in the off position.
2. Examine the general condition of the tool. Inspect the guard, switch, check for
loose screws, improper mounting, broken parts and any other condition that may
affect its safe operation. If abnormal noise or vibration occurs during operation, turn
the line trimmer off immediately and have the problem corrected by a qualified
repair person.
3. Ensure that you are on a flat surface and have secure footing.
4. Check that the line does not go beyond the guard, otherwise, cut off excessive
extension line, to keep the line extend until it touches the knife.
Edge Function
The machine can be used as an edge trimmer. The Edge feature allows for precise
and comfortable trimming along the lawn edge (Fig.11). To do this, press and hold
the edge button (7) and turn the lower shaft clockwise until hear a click (Fig.12).
15
Werbung
