Herunterladen Diese Seite drucken

VITINNI JK08014101 Bedienungsanleitung Seite 14

40 v batteriebetriebener akku-trimmer

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Battery capacity display
4 green LED lights are constantly burning between 75% -100%.
3 green LED lights are constantly burning between 50% -75%.
2 green LED lights constantly burns between 25% -50%
1 green LED lights constantly burning lower than 25%
If no LED lights come on, even after pressing the indicator button, the battery is
defective and needs to be replaced.
For safety reasons, the capacity of the battery can only be checked when the
machine has come to a complete stop.
N
OTE: Batteries may become warm while charging. This is normal. If the battery
is hot after continuous use in the tool, allow it to cool down to room temperature
before charging. This will extend the life of your batteries.
W
ARNING: Always disconnect the battery pack from the tool before any
assembly, adjustments or changing accessories.
Machine Assembly
The grass trimmer is supplied with some components not assembled. To assemble
these proceed as follows:
1. Mounting the Guard
Place the guard over the machine as shown in figure 5, align the screw holes on
guard with the screw studs on trimmer head, pass the guard through the spool, then
tighten the guard with 3 screws.
13

Werbung

loading