Connecting The System - Pioneer AVIC-F920BT Installationsanleitung

Section
03

Connecting the System

Connecting the system
The navigation unit
Green
WIRED REMOTE INPUT
Please see the Instruction
Manual for the Wired Remote
Control Adapters (sold separately).
8
Engb
Aerial
jack
30 cm
RDS-TMC tuner
Vehicle
aerial
( * 2)
— When connecting your iPod, both connections are necessary.
— It is necessary to set "AV1 Input" in "AV System Settings" to "iPod"
when connecting the iPod. (For details, refer to Operation Manual.)
3.55 m
IP-BUS connector
(IP-BUS connector is
available for AVIC-F20BT.)
USB and mini-jack
connector
2 m
( * 1)
Connect either the
USB Interface Cable
for iPod or an
1 m
appropriate USB
storage device.
( * 1)
( * 2)