Operator Safety - Briggs & Stratton SNAPPER NX100 Bedienungsanleitung

Products Covered by This
Manual
The following products are covered by this manual:
7800971-01, 2691517-00
Manual Contents:

Operator Safety..................................................................... 5

Features and Controls..........................................................9
Operation............................................................................. 10
Maintenance.........................................................................12
Troubleshooting.................................................................. 18
Warranties............................................................................19
Specifications...................................................................... 24
The images in this document are representative, and
are meant to complement the instructional copy they
accompany. Your unit may vary from the images
displayed. LEFT and RIGHT are as seen from the operator's
position.
Thank you for purchasing this quality-built Snapper
Walkbehind Mower. We're pleased that you've placed your
confidence in the Snapper
maintained according to the manuals, your Snapper
will provide many years of dependable service.
The manuals contain safety information to make you aware
of the hazards and risks associated with the unit and how
to avoid them. This Walkbehind Mower was designed to be
used as described in operator's manual and is not intended
for any other purpose. It is important that you read and
understand the instructions thoroughly before attempting
to start or operate this equipment. Save these original
instructions for future reference.
This product requires final assembly before use. Refer to the
setup guide for instructions on final assembly procedures.
Follow the instructions completely.
Operator Safety
Safety Definitions
For your safety, the safety of others, and to protect the
performance of equipment, follow the precautions listed
throughout the manual before operation, during operation,
and during maintenance procedures.
indicates a potential personal injury hazard.
DANGER
®
®
brand. When operated and
®
indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
indicates a situation which can cause damage to the
equipment, personal property and/or the environment, or
cause the equipment to operate improperly.
General Safety Messages
WARNING
This powerful cutting machine is capable of amputating
hands and feet and can throw objects that can cause injury
and damage! Failure to comply with the following SAFETY
instructions could result in serious injury or death to the
operator or other persons. The owner of the machine must
understand these instructions and must allow only persons
product
who understand these instructions to operate machine.
Each person operating the machine must be of sound
mind and body and must not be under the influence of any
substance, which might impair vision, dexterity or judgment.
5