Care And Maintenance - SmartGyro XL1 Handbuch

XL1- Manual
Speed restrictions
The maximum speed of the smartGyro is limited to approximately 12 km per hour. Please note that exceeding this speed will trigger the
speed alarm and cause the smartGyro to start emitting a series of warning beeps. This alarm is designed exclusively for your safety. The
smartGyro is not designed for speeds exceeding 12 kilometers per hour. We strongly recommend that you keep the speed below the limit.
Inspection, maintenance and storage of your Smartgyro
We recommend that you maintain a care routine for your smartGyro similar to that of a bicycle, a skateboard or a car. If you discover any
anomaly, please contact us through our website www.smartgyro.es

Care and maintenance

Check the wheels periodically to see if they are damaged or carry an excessive load. Avoid using harsh chemicals or solvents when
cleaning the smartGyro. Do not let liquids come into contact with smartGyro ports or buttons.
The smartGyro has an IP54 rating, which means it can withstand only small splashes of water. It is not resistant to water, nor should it be
used in waterlogged conditions. If water or other liquids get into it, permanent damage to the circuitry and its electronic components could
occur.
Storage
Store your smartGyro in interior areas, which are dry places and in proper conditions. If the ambient temperature of the storage location is
below 0 ºC or above 55 ºC, choose another location. To prevent the entry of dust and particles, store your smartGyro in its original packa-
ging.
If you are going to store your smartGyro for a long period of time, check that the battery of the product is at minimum levels. We recom-
mend recharging the battery every 3 months to make sure it is ready to drive after it has been stored.
31
smartgyro.es