SmartGyro XL1 Handbuch Seite 28

XL1- Manual
Using the SmartGyro
Step 1. Place the product on the ground. Please, choose a smooth surface where you can slide without difficulty. If it's the first time
you ride, look for a comfortable place to practice. We recommend an open area, without obstacles, with a few meters of free space in
each direction. The better the more clear it is.
Step 2. Press the POWER button on the bottom of the product on the side opposite the charging port. The device will beep indica-
ting that it is on.
Step 3. Check the upper light indicators. The battery icon should appear in blue and the
usage indicator also.
- If the battery icon lights red, it means that you must recharge your SmartGyro. - If the
device starts to emit a series of alarm beeps, the product is not in its correct starting position.
Turn off the product and place it in a smooth area to check that the wheels or mechanisms
are not clogged. Repeat step 2.
Step 4. Put on your helmet, the appropriate protections for elbows and knees and a
suitable clothing for bumps and falls.
Step 5. Hold on to your friend! Your assistant must always be by your side, pending of you
and in front of smartGyro. Ideally, it would be that I could climb and be able to use my arms
and shoulders to balance.
Step 6. Once up, jump safely and briefly backwards with both legs at the same time to get
off. Make sure your assistant is attentive to pick you up and help you.
27
smartgyro.es