Klarstein Icemeister 2G Bedienungsanleitung Seite 24

EN
24
TROUBLESHOOTING
Problem Possible cause
Low water level or no water
in the water reservoir.
The water reservoir
The water screen at the
empty indicator
bottom of the water reservoir
lights up.
is blocked.
Pump malfunction
Ice basket is full and the
infrared light is blocked by
the ice.
The ice basket full
The Infrared light-emitting
indicator lights up.
diode and the light-receiving
diode do not work.
The ice tray is not in the right
position.
The troubleshooting
indicator lights up.
The ice collects Making ice takes too much
together. time.
The water temperature in the
water reservoir is too low.
Suggested solution
Stop making ice, refill water
and then press the ON/
OFF button to restart the ice-
making cycle.
Clean the water reservoir.
Contact the costumer service.
Remove the ice from ice
basket.
Remove dirt from the diodes
and restart the appliance.
Contact the costumer service
if the diodes still do not work
after cleaning and restarting.
Check if the ice tray is
blocked.
Unplug the mains plug from
the socket. Plug it back in and
restart the appliance.
Stoppen Sie die Eiswürfel-
herstellung. Warten Sie,
bis das Eis geschmolzen
ist, bevor Sie die Eiswürfel-
herstellung fortsetzen.
Fill the water reservoir with
water that has a temperature
between 8 °C and 25 °C.