Hisense RB645N4WIF Benutzerhandbuch Seite 40

Remove screw①, then take down
2.
cover② from the top right side. Be
careful of the electrical connector③
below, because it's still connected. Then
unconnect it and remove cover②.
①
Self-tapping screw
②
Upper hinge cover
①
②
③
3.Press the door switch④ ,then remove it
upward. Install switch④ into cover⑤
(provided in the plastic
other cover② into the plastic bag.
④
4.Unscrew screws① by a 8mm socket
driver or a spanner, and remove hinge②.
Then put the conector③ into the hole.
Please hold the door by hand when
installing.
①
Special flange screw
②
Upper hinge
③
Electrical connector
5.Remove the upper door from the
middle hinge by carefully lifting the door
straight up. Then Place the upper door
on a smooth surface with its upper cover
upwards.
6.Install cover① (provide in the plastic
bag) on the top right side.Then remove
cover② from top left side of the
appliance, and put it into the plastic bag.
13
③
Eletrical connector
④
Door switch
③
④
bag). Put the
⑤ Upper hinge
cover-left
①
②
③
① Screw hole
cover-right
Loose screw③ and take down part②
7.
and part ①, Install replacement door
stopper-left④ and stop block-left⑤
(provided in the plastic bag) to the left
side with screw③. Keep part ① and
part② with the appliance for future
reference.
④
⑤
. Use the Allen wrench(provided in the
8
plastic bag) and cross-shaped
screwdriver to loosen the screws and
remove the middle hinge-right. Then
remove the lower door.
9. Place the lower door on a smooth
surface with its panel upwards. Loose
screw③ and take down part② and
part①, then Install door stopper-left④
and stop block-left⑤ (provided in the
plastic bag) to the left side, and tighten
them with screw③ securely.
④
⑤
② Screw hole
cover-left
① Door stopper
② Stop block
③ Self-tapping screw
①
②
③
Door stopper-left
④
⑤ stop block-left
①
Door stopper
②
Stop block
③
Self-tapping screw
①
②
③
④Door stopper-left
⑤
stop block-left