Before Fi Rst Use; Function Check; Maintenance; Instructions For The User - neumarker 308.070 Bedienungsanleitung

If the unit has to be set-up close to walls, partition panels, kitchen cabinets, decorative edgings, etc.
you have to make sure that these have not been made from infl ammable material. Otherwise they
have to be insulated with a heat-resistant and non-infl ammable covering. Please adhere to the fi re
prevention regulations.
• Please read the Operation manual carefully.
• Check the unit if any visible damages.
• If any damages found please contact your customer Service immediately.
There may not be damages at the power cord or plug. In this case please contact your customer
service to check the unit before using it.
Remove carefully the protective foil from the outside panels in order to avoid glue residues remaining
on the unit. Eventual glue residues may be removed by using an appropriate thinner.
Switch on the unit according to our following operating instructions. Explain to the Operator how to
set the unit into work as well as its function by using our operating instructions.
Before carrying out any maintenance work, make sure that the unit has been disconnected from the
power supply and wait until the unit has cooled down. We recommend to let the unit be inspected
regularly by a specialist (at least once a year).
Please study carefully our operating instructions as they give you important advices regarding to
your safety during installation, Operation and maintenance. Pass on these operating instructions to
any further user of this unit. Contact only an authorized technical service for carrying-out repairs and
insist on using original spare parts. Failure to observe our above instructions may affect your safety
when operating the unit.
Never clean the unit by a water-jet!
The unit is only made for Professional use and may only be operated by qualifi ed staff.
308070-71 en ma 2012-07
BEFORE FIRST USE

FUNCTION CHECK

MAINTENANCE

INSTRUCTIONS FOR THE USER

4/7