Measurements Modes - Altana BYK micro-TRI-color Kurzbedienungsanleitung

BYK-Gardner GmbH

5 Measurements Modes

Take readings without worklist
In this mode free measurements can be made and named.
1. Click on instrument icon and place unit on sample.
2. Press button Operate or click instrument icon to take a reading.
3. Circles represent the four pins on the bottom:
Green = Pressed. Red = Not pressed.
4. A minimum of three pins need to be pressed.
5. To cancel reading click on back arrow.
Number of required readings per sample is stored in the instrument. Instru-
ment must be lifted between readings.
Input of sample identification
All readings are automatically saved for the transfer to the PC.
Default name is "Sample" with an incrementing number.
1. To change default name, click on name field and the keyboard opens.
2. Select desired letters or numbers and confirm with the checkmark.
3. Use backspace arrow to delete input characters.
300 100 116 - 2103
micro-TRI-color
9