Description Of The Device - Archos ARNOVA 7 Handbuch

DESCRIPTION OF THE DEVICE

Back button: returns to the previous screen
1
2
Menu button: gives menu options according to the current screen
On/Off button: enables to turn on or turn off the device.
3
To put your device in standby (and allow a quick start up), press the Power button once.
Hardware Reset
4 In the event that your ARNOVA freezes operation, you can
:
press the "pinhole reset"
Microphone
5
USB Host port: to connect a keyboard, a mouse or a mass storage USB
6
device. Go on the Home screen, tap on the Menu icon
. If the Host port is off, tap on the Host port line to turn it on. Important: turn off the
select
Host port after use.
Mini-USB port: to connect your ARNOVA to your computer,
7
using the included USB cable (to transfer files)
Power connector
8
9
Headphone jack
10 Micro-SD card slot
11
Home button
When touchscreen functioning is impaired, you can recalibrate your touchscreen. If you can access the Android
1. In the device homescreen, tap on
2. In the Settings screen, tap on Touchscreen panel calibration and follow the on-screen instructions.
If you can't access the Android
2
UserGuide_Arnova7_PN109899_book.indd 2
button.
, then tap on Settings.
TM
interface, see Hardware Reset
, then select
Settings/USB Mode
4
.
4
3 2 1
5
10
11
9
8
7
6
TM
interface:
13/06/2011 16:41:38