Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NETWORK SETUP
-------------------------------------------------------------------------------------------
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Adress«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
«, »
«,
V
Λ
<
>
»
« or »
« and press »OK« to confirm.
>
3
Select the menu item »Network« with »
« or
<
»
« and press »
V
« to confirm.
– »Network« menu is active.
4
Select the line »Change Connection Type«
»
« or »
« and press »OK« to confirm.
V
Λ
5
Select the option »Wired« with »
V
« or »
Λ
«
and press »OK« to confirm.
6
Select the line »Network Configuration«
<
>
with »
« or »
« sand use »
« or »
« to
V
Λ
select »Manual«.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Settings > Network
Tuesday
xx xxx xxxx
Picture
Sound
Source
TV
Network
Timer
Change Connection Type
Wired
Network Configuration
Manual
Wake-on-LAN
Off
IP Address
192 . 168 . 000 . 200
DNS
192 . 168 . 000 . 254
Netmask
255 . 255 . 255 . 200
Connect
Test Connection
Change Area
Input Mode
Back
Exit
BACK
EXIT
7
Select the line »IP Address« with »
«.
V
Enter IP address with »1...0«.
8
Select the line »DNS« with »
V
«.
Enter IP address with »1...0«.
9
Select the line »Netmask« with »
V
«
Enter Netmask address with »1...0«.
10
Select the line »Gateway« with »
V
«.
Enter Gateway address with »1...0«.
90
ENGLISH
11
With » « (red) select »Connect« option to
establish modem connection.
– »Connecting... Please wait« message will
be displayed, and if the connection is
successful, Connection to Gateway: Suc-
cessful« message will be displayed.
12
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success-
ful« message will be displayed.
13
Press »EXIT« to end the settings.
NETWORK SETUP
-------------------------------------------------------------------------------------------
Wireless network
Wireless network connection
SERVICE
Optic Out
LAN
USB3
HDMI3
HDMI4
SATELLITE
ANT-IN
(ARC)
(MAIN)
13/18V max.500mA
(SUB)
5 V max.50mA
MAIN
SUB
1
Television includes a built-in Wireless WiFi
Adapter to connect it to wireless network.
Notes:
Wireless LAN adapter supports IEEE
7
802.11B/G and N communication
protocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in wireless HD video playback.
If you use a modem that supports IEEE
7
802.11B/G, video playback performance may
be poor when compared to a modem that sup-
ports IEEE 802.11N since the data transfer rate
of IEEE 802.11B/G protocol is lower.
Please note that video playback perfor-
7
mance in a DLNA application on a wireless
local network and in a SMART inter@
ctive TV 4.0 application on a network with
internet connection depends on the number
of users on the network as it is the case in
every wireless network.
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network
7
sharer on an elevated location will increase
the wireless connection reception strength.
Wireless connection reception strength may vary
7
depending on the type of the modem and the
distance between the modem and television.
Wireless network settings
You have several ways to connect your TV to
your home network.
A
Automatic connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
Depending on the router, you can use the
following options:
– Option "WPS-PBC" (Push Button Configu-
ration);
– Connecting with a WPS PIN;
– Connecting by entering the network pass-
word.
B
Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
ENGLISH
91
Werbung
Inhaltsverzeichnis
