GRUNDIG Service Chassis KR Es gelten die Vorschriften und Sicherheitshinweise The regulations and safety instructions shall be valid gemäß dem Service Manual "Sicherheit", Material- as provided by the "Safety" Service Manual, part nummer 720108000001, sowie zusätzlich die even- number 720108000001, as well as the respective tuell abweichenden, landesspezifischen Vorschriften! national deviations.
GRUNDIG Service Chassis KR Durchführen von Messungen Carrying out Measurements Bei Messungen mit dem Oszilloskop an Halb leitern sollten Sie nur When making measurements on semi-con duc tors with an oscillo scope, Tast köpfe mit 10:1 - Tei ler verwen den. Außerdem ist zu beachten, dass ensure that the test probe is set to 10:1 dividing factor.
Product Code Code" oder Ihre Display-Variante Chassis manual, please look for a current nicht aufgeführt sein, können version at the GRUNDIG service Sie eine aktualisierte Version auf portal "http://service.grundig.de". dem GRUNDIG Service-Portal Serialnummer / Before changing any board please "http://service.grundig.de"...
GRUNDIG Service Chassis KR Technische Daten / Technical Data 40" 40 GUB 8678 40 GUS 8675 40 GUS 8679 Sydney Order No. PKY000 PKX000 PMB000 Product Code Country DE; CH; AT DE; CH; AT Approbations Remote control TS3 (Netflix) TS4 (Netflix) + Comfort Remote...
Seite 7
GRUNDIG Service Chassis KR 40 GUB 8678 40 GUS 8675 40 GUS 8679 Sydney DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF & UHF 47 - 862 VHF & UHF Imput level / Impedance 47 - 70dbµV / 75 Ohm...
Seite 8
GRUNDIG Service GRUNDIG Service Chassis KR Chassis J5 Technische Daten / Technical Data 40"/49" 40 GUW 8678 40 VLX 8681 BP 49 GUB 8678 Order No. PKJ000 PQZ000 PME000 Product Code Country DE; CH; AT FR; ES Approbations Remote control...
Seite 9
GRUNDIG Service GRUNDIG Service Chassis KR Chassis J5 40 GUW 8678 40 VLX 8681 BP 49 GUB 8678 DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF & UHF 47 - 862 VHF & UHF Imput level / Impedance 47 - 70dbµV / 75 Ohm...
Seite 10
GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis J5 Chassis J5 Technische Daten / Technical Data 49" 49 GUB 9688 49 GUS 8675 49 GUS 8679 Sydney Order No. PKF000 PMG000 PMC000 Product Code Country DE; CH; AT Approbations...
Seite 11
GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis J5 Chassis J5 49 GUB 9688 49 GUS 8675 49 GUS 8679 Sydney DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF & UHF 47 - 862 VHF &...
Seite 12
GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis J5 Technische Daten / Technical Data 49" 49 GUS 9688 49 GUS 9689 New York 49 GUW 8678 Order No. PNW000 PKE000 PLH000 Product Code Country DE; CH; AT...
Seite 13
GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis J5 49 GUS 9688 49 GUS 9689 New York 49 GUW 8678 DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF & UHF 47 - 862 VHF &...
Seite 14
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 49" 49 VLX 8670 AT 49 VLX 8681 BP 49 VLX 9681 SP Order No. PNQ000 PLF000 PLB000 Product Code Country SE;...
Seite 15
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis J5 Chassis J5 49 VLX 8670 AT 49 VLX 8681 BP 49 VLX 9681 SP DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF &...
Seite 16
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 49"/55" RIO 49 CLX 8670 AT 55 GUB 8672 55 GUB 8678 Order No. PNT000...
Seite 17
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 RIO 49 CLX 8670 AT 55 GUB 8672 55 GUB 8678 DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF &...
Seite 18
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 55" 55 GUB 9688 55 GUS 8679 Sydney 55 GUS 9688 Order No.
Seite 19
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 55 GUB 9688 55 GUS 8679 Sydney 55 GUS 9688 DVB-C Front end Input frequency (MHz) 47 - 862 VHF &...
Seite 20
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 55" 55 GUS 9689 New York 55 GUW 8678 55 VLX 8670 AT Order No.
Seite 21
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis J5 Chassis J5 55 GUS 9689 New York 55 GUW 8678 55 VLX 8670 AT DVB-C Front end Input frequency (MHz) 47 - 862 VHF & UHF 47 - 862 VHF &...
Seite 22
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 55" 55 VLX 8681 BP 55 VLX 9681 SP RIO 55 CLX 8670 AT Order No.
Seite 23
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 55 VLX 8681 BP 55 VLX 9681 SP RIO 55 CLX 8670 AT DVB-C Front end Input frequency (MHz) 47 - 862 VHF &...
Seite 24
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 Technische Daten / Technical Data 65" 65 GUB 9688 65 GUS 9688 65 GUS 9689 New York Order No.
Seite 25
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KR Chassis KP Chassis KP Chassis J5 Chassis J5 65 GUB 9688 65 GUS 9688 65 GUS 9689 New York DVB-C Front end Input frequency (MHz) 47 - 862 VHF &...
Bedienhinweise Dieses Kapitel enthält Auszüge aus der Bedienungsanleitung. Weitergehende Informationen entnehmen Sie bitte der gerätespezifischen Bedienungsanleitung, die Sie unter www.grundig.de, Menüpunkt Downloads/Bedienungsanlei- tungen herunterladen können. AUF EINEN BLICK AUF EINEN BLICK ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Anschlüsse des Fernsehgerätes SCART / S-VHS / COMPONENT Common Interface- Steckplatz.
AUF EINEN BLICK AUF EINEN BLICK ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Bedienelemente des Fernseh- Fernbedienung – Hauptfunktionen gerätes O/I Netzschalter, schaltet das Fernsehgerät in Ein/Bereitschaft Einschalten aus Stand-by; Bereitschaft (Stand-by) oder aus. Programm-Direktwahl Hinweis: Der Netzschalter muss leicht zugänglich Videotext aufrufen/ausschal- Favoritenlisten sein. Multifunktionsschalter Funktionen entsprechend Bildschirmhilfe, HbbTV...
> betrieben wird, mit » «, » «, » « oder Wird keine Anmeldung am Heimnetzwerk kostenlose Applikation »GRUNDIG TV » « wählen und mit »OK« bestätigen. Λ benötigt, mit » « (blau) die Einstellung Remote« vom Apple App Store oder vom –...
ERSTINSTALLATION ERSTINSTALLATION ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ Anmeldung am Heimnetzwerk – mit Zeile »Netzwerk wählen« mit » « oder Programme (DVB-S) einstellen Suchlauf mit » « (rot) starten. » Λ « wählen und mit »OK« bestätigen. – Das Menü »Digital Suche« wird ein- einem LAN-Kabel Hinweise: –...
ERSTINSTALLATION ERSTINSTALLATION ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ Programme (DVB-C) einstellen Programme (DVB-T) einstellen Programmtabelle für die Programmtabelle anwählen digi talen Programme ändern Hinweis: Hinweis: Menü mit »MENU« aufrufen. Für den „zweiten Tuner“ ist keine weitere Für den „zweiten Tuner“ ist keine weitere < Programme die über den Suchlauf gefunden Menü...
Seite 31
ERSTINSTALLATION ERSTINSTALLATION ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ Programme in der Programmtabelle Reihenfolge der Programme in der Programme in der Programmtabelle Hinweise: suchen Programmtabelle ändern nach „Kriterien“ sortieren Programme können wieder aus Favoriten- listen gelöscht werden. Mit dieser Suche werden Programme schnell Im Menü »Programmtabelle« die Program- Sie können die Reihenfolge der Programme in Dazu den Bearbeitungsmodus mit »...
Seite 32
ERSTINSTALLATION FERNSEH-BETRIEB – GRUNDFUNKTIONEN ------------------------------------------------------------------------------------ ----------------- Eigene Namen für die Favoritenlisten Eigene Namen für die AV-Programm- Audiosprache PIP-Betrieb vergeben (max. 6 Zeichen) plätze vergeben Bei digitalen Fernsehprogrammen können Sie PIP (Bild im Bild) bietet Ihnen die Möglichkeit, Sie können für alle Favoritenlisten eigene Na- Sie können für alle AV-Programmplätze eigene unter verschiedenen Sprachen auswählen.
HBBTV-BETRIEB USB-RECORDING ------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- HbbTV Bedienung HbbTV aus-/einschalten Externe Datenträger anschließen Hinweise: Die Buchse USB3 des Fernsehgerätes Nach dem Umschalten auf ein Fernsehpro- Wenn Sie den interaktiven Dienst HbbTV aus- Hinweise: liefert gemäß USB-Spezifikationen maximal gramm das HbbTV unterstützt, wird eine Infor- schalten, ist dieser Dienst nicht mehr verfügbar.
USB-RECORDING USB-RECORDING ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Einstellungen für USB Recording Externe Datenmedien auswählen Partition des externen Datenträgers Timeshift – Sendungen formatieren „anhalten″ Wenn mehrere externe Datenträger an das Menü anwählen Fernsehgerät angeschlossen sind, können Sie Im Menü »Datenträgerverwaltung« die Zeile Die aktuelle Sendung kann „angehalten” wer- Menü...
-------------------------------------------------------- < Fernsehprogramme aufnehmen Vorgang abbrechen, dazu mit » « oder SMART Inter@ctive TV 4.0+ – Grundig behält sich das Recht vor, jegliche > » « die Schaltfläche »Nein« anwählen und Änderungen an den über Ihr SMART Inter@ Internetapplikationen Sie können Fernsehprogramme aufnehmen mit »OK«...
SMART INTER@CTIVE TV 4.0+ SMART INTER@CTIVE TV 4.0+ -------------------------------------------------------- -------------------------------------------------------- Erste Schritte mit Smart Inter@ Internetapplikationen wählen Wählen Sie nach Abschluss der Eingabe mit Alle Applikationen anzeigen < > < » «, » Λ «, » « und » « die Option » «...
SMART INTER@CTIVE TV 4.0+ JUGENDSCHUTZEINSTELLUNGEN -------------------------------------------------------- ------------------------------------------- Startseite von Smart Inter@ctive TV 4.0+ Menü mit »MENU« aufrufen. Menüs sperren Applikationen. Menüpunkt »Einstellungen« mit » «, Mit dieser Funktion können Sie folgende Me- SMART Inter@ctive TV 4.0+ < > » «, » «...
JUGENDSCHUTZEINSTELLUNGEN JUGENDSCHUTZEINSTELLUNGEN ------------------------------------------- ------------------------------------------- PIN-Code ändern Fernsehprogramme sperren Ein gesperrtes Fernsehpro- gramm ansehen Sie können statt des Werkscodes »1234« einen Sie können einzelne Fernsehprogramme mit persönlichen PIN-Code eingeben. Notieren Sie einem persönlichen PIN-Code sperren, zum Sie können ein durch den PIN-Code gesperrtes sich bitte Ihren persönlichen PIN-Code.
GERÄTESOFTWARE ZUBEHÖR VERWALTEN -------------------------------------------------------------------------------------- -------------------------------------------------------------------------- Menü mit »MENU« aufrufen. Achtung: Sie können an Ihr Fernsehgerät umfangreiches Zubehör anschließen. Im folgend beschriebenen Während des Updates das Fernsehgerät Menüpunkt »Einstellungen« mit » «, » Λ «, Menü sehen Sie den Status des jeweiligen Gerä- nicht ausschalten! Nach erfolgreichen Up- <...
RESET-FUNKTIONEN NETZWERK INSTALLATION ---------------------------------------------------------------------------------- ------------------------------------------------------------------ Menü mit »MENU« aufrufen. Einstellungen mit Kapitel „Erstinstallation und Anmeldung am Router für den Die Option »Kabel« mit » « or » Λ « wäh- Fernsehprogramme einstellen“ auf Seite 20 len und mit »OK« bestätigen. LAN-Betrieb Menüpunkt »Einstellungen«...
NETZWERK INSTALLATION NETZWERK INSTALLATION ------------------------------------------------------------------ ------------------------------------------------------------------ Manuelle Anmeldung Anmeldung an das Heimnetzwerk mit » « Betrieb über WLAN Wir empfehlen, während des Betriebes mit (rot) starten. der SMART Inter@ctive TV 4.0 Funktion Wenn keine automatische IP-Adresse vorhanden andere Geräte im Heimnetzwerk abzu- –...
Seite 42
NETZWERK INSTALLATION NETZWERK INSTALLATION ------------------------------------------------------------------ ------------------------------------------------------------------ Voraussetzungen Anmeldung an das Heimnetzwerk mit » « Automatische Anmeldung mit Eingabe Einstellungen > Netzwerk Dienstag (rot) starten. xx xxx xxxx des Netzwerk-Kennwortes Die meisten Heimnetze sind dynamisch, d.h. – Die Meldung »WPS-Taste an ...« wird die Daten für IP Adresse, Netzwerkmaske und Verwenden Sie diese Art der Anmeldung, wenn eingeblendet.
NETZWERK INSTALLATION NETZWERK INSTALLATION ------------------------------------------------------------------ ------------------------------------------------------------------ Hinweis: Manuelle Anmeldung Zeile »Netzmaske« mit » « wählen und mit Name des Fernsehgerätes »OK« bestätigen. Damit sich das Fernsehgerät am Heimnetz- ändern Wenn keine automatische IP-Adresse vorhanden Daten mit »1…0« eingeben und mit »OK« werk anmelden kann, muss der Netzwerk- ist, müssen Sie die Zugangsdaten für »IP Adres- Um Ihr Fernsehgerät im Netzwerk identifizieren...
NETZWERK INSTALLATION WEITERE PROGRAMME EINSTELLEN ------------------------------------------------------------------ ------------------------------------- Fernsehgerät bei einem „ver- Zeile »Sicherheitstyp« mit » « oder » Λ « Signalinformationen anzeigen < > wählen und mit » « oder » « die benötigte steckten“ Netzwerk anmelden (nur bei digitalen Programmen) Option (WPA2) wählen.
Operating Hints This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions which can be downloaded by www.grundig.com, submenu Downloads/Manuals. OVERVIEW OVERVIEW -------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------- Connections on the television set SCART / S-VHS / COMPONENT...
OVERVIEW OVERVIEW -------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------- Control buttons on the TV Remote control - main functions Power switch, switches the television into standby mode and off. Note: Turns on and off the television There shall not be any obstacle around Switches on from standby set (stand-by).
Seite 47
« or » « and press »OK« to confirm. data media; Λ LAN connection, or downloading the free »GRUNDIG TV Starts playback in the DLNA menu. – »Welcome« menu appears. – continue at point for an automatic Remote« application from Apple App. Store Step-by-step installation will be made to be WLAN connection.
INITIAL SET-UP INITIAL SET-UP --------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------- Connecting to a home network with a Select the line »Select Access Point« with Searching television channels with sat- Tuning cable digital television channels » « or » Λ « and press »OK« to confirm. LAN cable ellite signal (DVB-S) (DVB-C)
Seite 49
INITIAL SET-UP INITIAL SET-UP --------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------- Tuning terrestrial digital television Changing the Channel Editor for Opening the Programme Table channels (DVB-T) the digital channels Open the menu with »MENU«. Note: Channels found at the end of the search are Select the »Settings« menu with » «, »...
Seite 50
INITIAL SET-UP INITIAL SET-UP --------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------- Searching channels by name in the Moving the channels in the channel or- Sequencing channels in the Channel Notes: Channel Editor ganizer to different channel positions Editor You can delete channels from the favourites list.
INITIAL SET-UP TV OPERATION – BASIC FUNCTIONS --------------------------------------------------------------------------------------------------- --------------------------------- Enter own names for the favourites lists Renaming AV channels Audio language PIP mode (max. 6 characters) You can rename AV channels according to the You can select various languages when watch- PIP (picture in a picture) allows you to watch device you have connected.
Seite 52
HBBTV MODE USB RECORDING ------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------- Using HbbTV Deactivate and activate HbbTV Connecting external data media Notes: The socket USB3 of the television supports When you switch to a TV program that supports This option allows turning off Hbb TV feature, Notes: 500 mA current according to the USB stan- HbbTV, an info message will appear stating that...
USB RECORDING USB RECORDING ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- USB recording settings Selecting external data media Formatting the partition Time shift – ″ Pausing” programmes If there are more than one external data media In the »Disk Management« menu select the Selecting the menu connected to the television, then select one of line »Format Partition«...
Seite 54
– »Inter@ctive Applications« menu will be applications. Select the channel with »1…0« or »P+«, displayed. During initial login, general Grundig is not responsible for the content »P–« and press » « to start the record- terms and conditions for users will be ing.
SMART INTER@CTIVE TV 4.0+ SMART INTER@CTIVE TV 4.0+ -------------------------------------------------------- -------------------------------------------------------- Selecting internet applications Displaying all application Smart Inter@ctive TV 4.0+ home page Press »@« to open »My Apps« menu. Application displayed on SMART inter@ctive Applications. SMART Inter@ctive TV 4.0+ – SMART inter@ctive TV 4.0+ home page is TV 4.0+ home page are just a few of the ap- All Applications.
SMART INTER@CTIVE TV 4.0 FEATURE PARENTAL SETTINGS -------------------------------- --------------------------------------------------------------------------------- Open menu with »MENU« button. Note: When the TV is in review buffer mode, the Smart Inter@ctive TV Select menu item »Settings« with » «, » Λ «, Online Store My Apps parental rating of the program in the live <...
PARENTAL SETTINGS PARENTAL SETTINGS --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- Blocking the multifunction Blocking a television channel Watching a blocked television switch channel You can block individual television channels which are not suitable for children using a When the key lock is activated, the multi function You can watch a TV channel blocked with PIN personal PIN code.
DATE AND TIME SETTINGS ACCESSORIES ----------------------------------------------------------------- ------------------------------------------------------------------------------------------------------ Open menu with »MENU« button. Manual tuning You can connect various accessories to your television to use with video talk, volume control, Select menu item »Settings« with » «, » Λ «, You can set the local time difference yourself motion control or a keyboard and mouse to use <...
RESET FUNCTIONS NETWORK SETUP ---------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Open menu with »MENU« button. Deleting channel history Wired network settings Select the line »Network Configuration« < > with » « or » Λ « and use » « or » « to Select menu item »Settings« with » «, »...
NETWORK SETUP NETWORK SETUP ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Manual connection With » « (red) select »Connect« option to Wireless network Wireless network settings establish modem connection. Certain networks require Static IP address. If You have several ways to connect your TV to Wireless network connection –...
NETWORK SETUP NETWORK SETUP ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Technical requirements To continue after pressing the WPS button Select the line »Select Access Point« with Connecting automatically by entering on the access point, select the option »Con- » « or » Λ « and press »OK« to confirm. the network password Most of the home networks are Dynamic.
NETWORK SETUP NETWORK SETUP ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- Note: Manual connection Select the line »Gateway« with » «. Change TV Name Enter Gateway address with »1…0«. For device to discover the wireless modem Certain networks require Static IP address. If To make it possible to identify your TV in the net- on the network, the network name should your network requires a Static IP address, you Select the line »Select Access Point«...
NETWORK SETUP SETTING FURTHER CHANNELS ------------------------------------------------------------------------------------------- ----------------------------------------------------- Connecting the TV to a “hidden” Select the network with » « or » Λ « and Creating a list of favourites - analog Displaying signal information press »OK« to confirm. channels network (only for digital television channels) –...
GRUNDIG Service Chassis KR Service- und Sonderfunktionen Service and Special Functions Tastenfunktionen Functions of the buttons Aufrufen/Beenden des Menüs / Beenden des Service Modes Call up/exit the Menu / exit the Service Mode MENU MENU Menü-Zeile (Menüpunkt) wählen Call up the dialogue line (point of menu)
Seite 65
GRUNDIG Service GRUNDIG Service Chassis KR Chassis J5 Menü Einstellung Menüpunkt 49 GUS 8679 49 GUS 9689 Menu Point of Menu Adjustment 49 GUB 9688 49 GUS 8675 49 GUS 9688 49 GUW 8678 Sydney New York 3 3 3 3 4 4 4 4...
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KY Chassis KT Chassis KT Chassis J5 Menü Einstellung Menüpunkt Menu Point of Menu Adjustment 49 VLX 8670 AT 49 VLX 8681 BP 49 VLX 9681 SP...
Seite 67
GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis J5 Menü Einstellung Menüpunkt 55 GUS 8679 55 GUS 9689 Menu Point of Menu Adjustment 55 GUS 9688 55 GUW 8678 55 VLX 8670 AT 55 VLX 8681 BP...
Seite 68
GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service GRUNDIG Service Chassis KR Chassis KR Chassis KY Chassis KT Chassis KT Chassis J5 Menü Einstellung Menüpunkt 65 GUS 9689 Menu Point of Menu Adjustment 55 VLX 9681 SP 65 GUB 9688...
GRUNDIG Service Chassis KR Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams Chassisplatte / Chassis Board ZKR190R-4 Bestückungsseite / Component Side Lötseite / Solder Side POS. POS. POS. POS. POS. POS. POS. POS. C100 T 111 C200 T 116...
Seite 70
GRUNDIG Service Chassis KR POS. POS. POS. POS. POS. POS. POS. POS. C1624 C3405 C3563 IC203 L721 B 145 R116 R231 T 114 R326 B 124 C1625 T 178 C3406 C3564 IC204 L722 T 155 R117 T 112 R232 R327...
Seite 71
GRUNDIG Service Chassis KR POS. POS. POS. POS. POS. POS. POS. POS. R533 B 144 R1000 T 155 R1405 R3113 R3440 TP10 TP109 TP204 R534 B 138 R1001 B 201 R1406 R3114 R3441 T 100 TP11 TP110 TP205 R535 B 144...
Seite 72
Chassisplatte / Chassis Board ZKR190R-4 TRANSPORT LINE Ansicht von der Bestückungsseite FID4 FID3 L1101 C176 R3439 C1115 C169 R166 C3445 POWER View of Component Side R3121 R 3116 IC3404 S100 IC3102 IC113 L1104 L1103 L600 IC1100 RP3102 L3400 R3401 R3404 C3440 IC3400 65''...
GRUNDIG Service Chassis KR Chassisplatte / Chassis Board ZKR190R-4 Ansicht von der Bestückungsseite / View of Component Side TRANSPORT LINE FID4 L1101 R3439 C1115 C3445 POWER R3121 R 3116 IC3404 S100 IC3102 L1104 L1103 IC1100 RP3102 L3400 R3401 R3404 C3440...
Seite 74
GRUNDIG Service Chassis KR Chassisplatte / Chassis Board ZKR190R-4 Ansicht von der Bestückungsseite / View of Component Side TRANSPORT LINE FID4 FID3 L1101 C176 L1101 R3439 C1115 C169 R166 C1115 C3445 POWER R3121 R 3116 IC3404 S100 IC3102 IC113 L1104...
Seite 75
Chassisplatte / Chassis Board ZKR190R-4 Ansicht von der Lötseite FID8 FID7 TP63 View of Solder Side TP42 TP39 C113 TP18 C105 TP16 TP17 TP38 TP43 TP27 TP19 TP48 TP20 TP50 TP45 TP99 TP182 TP66 TP98 TP28 TP23 TP65 R1100 BARCODE R818 TP103 TP67...
Seite 96
GRUNDIG Service Chassis KR Chassisplatte / Chassis Board – FRC SPI1_CK Please place TP3104, TP3110 and a GND Test points inline next to each other. Port connections GPIOs VID_0 SPI1_DI Please place TP3104, TP3110 and a GND Test points inline next to each other.
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551869700 GEH.-VORDERTEIL SCHWARZ-GRAU...
Seite 106
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551869200 GEH.-RAHMEN SW-SILBER...
Seite 107
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551869200 GEH.-RAHMEN SW-SILBER...
Seite 108
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551876400 GEH.-RAHMEN WEISS...
Seite 109
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551873800 GEH.-RAHMEN SCHWARZ...
Seite 110
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874300 GEH.-RAHMEN SILBER...
Seite 111
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874300 GEH.-RAHMEN SILBER...
Seite 112
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874300 GEH.-RAHMEN SILBER...
Seite 113
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551872500 GEH.-RAHMEN SCHWARZ...
Seite 114
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551872500 GEH.-RAHMEN SCHWARZ...
Seite 115
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874500 GEH.-RAHMEN SILBER...
Seite 116
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874500 GEH.-RAHMEN SILBER...
Seite 117
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551874500 GEH.-RAHMEN SILBER...
Seite 118
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551889100 GEH.-RAHMEN SILBER...
Seite 119
Sie eine aktualisierte Version auf dem for a current version at the service portal finden Sie eine aktualisierte Version auf dem for a current version at the service portal Service-Portal "http://service.grundig.de". "http://service.grundig.de". Service-Portal "http://service.grundig.de". "http://service.grundig.de". 001.000 759551875300 GEH.-RAHMEN SCHWARZ...
Seite 120
GRUNDIG Service GRUNDIG Service Chassis SU Chassis KR Ersatzteilliste / Spare Parts List 10 / 2016 CHASSISMODUL / CHASSIS BOARD KR Pos. Part Number Description D102 759551497600 DIODE STKY-SMD PMEG2020EH 2A 20V D103 759551497600 DIODE STKY-SMD PMEG2020EH 2A 20V D1000...
Seite 121
GRUNDIG Service Chassis KR Pos. Part Number Description 759551561300 SMD SPULE 3.3UH 2A L3404 759551876100 COIL-SMD 3.3UH M 2A 4*4*1.8 L3406 759551832300 BOB-SMD 0.9UH 7.8A 8*8*4.2 L3408 759551561300 SMD SPULE 3.3UH 2A L3408 759551876100 COIL-SMD 3.3UH M 2A 4*4*1.8 S100...