Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Connecting to a home network with a
LAN cable
12
Confirm »Change Connection Type« with
»OK«.
13
Select the option »Wired« with »
V
« or »
Λ
«
and press »OK« to confirm.
Note:
The settings for a manual LAN connection
7
are on page 90.
14
Press » « (red) to select »Connect« option to
establish modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
15
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
16
To switch to »Source« menu press »
«
(blue).
Note:
Continue searching for TV channels with:
7
– point
26
for DVB-S reception;
– point
30
for DVB-C reception;
35
– point
for DVB-T reception.
Connecting automatically by entering
the network password
17
Confirm »Change Connection Type« with
»OK«.
18
Select the option »Wireless« with »
V
« or
»
« and press »OK« to confirm.
Λ
19
Confirm the message »Do you want to turn
<
>
on Wi-Fi?« select »Yes« with »
« or »
« and
press »OK« to confirm.
20
Select the line »Select Access Point« with
»
V
« or »
Λ
« and press »OK« to confirm.
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
21
Select the network that you want to con-
nect with »
« or »
« and press »OK« to
V
Λ
confirm.
– Wireless connection password screen is
displayed.
22
Select the required character with »
«,
V
<
>
»
Λ
«, »
« or »
« and move to the next
character with »OK«.
– Using »Shift«
»OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
23
Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
24
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
25
To switch to »Source Setup« menu press
»
« (blue).
Note:
Continue searching for TV channels with:
7
26
– point
for DVB-S reception;
– point
30
for DVB-C reception;
– point
35
for DVB-T reception.
ENGLISH
21
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Searching television channels with sat-
ellite signal (DVB-S)
26
Select the option »Satellite (DVB-S/S2)«
with »
« or »
« and press »OK« to
V
Λ
confirm.
– The satellite Astra 19.2° East is preset.
27
Confirm the push button »Continue« with
»
« (blue).
Notes:
Select the Channel Type.
7
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
Select Scan Mode.
7
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
« or »
« and press »OK« to
V
Λ
select and mark or unmark the »Free« and/
or »Scrambled« items.
28
Press » « (red) to start searching.
– »Digital Searching« menu appears and
the scan for TV channels begins.
– The scan is complete as soon as the mes-
sage »Search is completed!« appears.
29
Select the »Channel Editor« with »OK«.
22
ENGLISH
Tuning cable digital television channels
(DVB-C)
Note:
No additional setting is necessary for the
7
"second tuner".
30
Select the option »Cable (DVB-C)« with
»
V
« or »
Λ
« and press »OK« to confirm.
31
Select the line »Scan Type« with »
« or
V
»
Λ
«.
<
Select the option »Quick« or »Full« with »
«
>
or »
«.
– »Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
– »Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet
forums.
32
Confirm the push button »Continue« with
»
« (blue).
Note:
Perform Channel Type selection. Press
7
»
« or »
« to select whether you want to
V
Λ
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to se-
lect and mark or unmark the »Digital« and
»Analog« items.
33
Press » « (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
34
Select the »Channel Editor« with »OK«.
Werbung
Inhaltsverzeichnis
