Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Service
Manual
Digi Basic /
Digi Basic plus
Sach-Nr./Part No.
72010-019.30
CUC 1825
ST 63-255 IDTV / LOG
ST 63-255/8 IDTV / LOG
ST 70-255 IDTV / LOG
ST 70-255/8 IDTV / LOG
M 70-280 IDTV / LOG
M 70-280/8 IDTV / LOG
Boston ST 270 IDTV / LOG
TP 900
(29642-061.11)
1
2
3
4
5
6
7
8
9
0
TXT
SAT
PIP
AUX
VIDEO
TP 900
TP 771
(29642-059.51)
1
2
3
PIP
4
5
6
7
8
9
AUX
0
AV
TXT
TV
VIDEO
SAT
TP 771
Bei einigen Modellen (72 cm-Geräte) müssen Sie für den Chassisaus-
bau die Steckverbindungen zum Bedienteil lösen.
Für diesen Servicefall bietet der ZKD zur Vereinfachung der Reparatur
eine universelle Bedieneinheit Sach-Nr. 29305-165.59 (bestehend
aus Netzschalter und Infrarotempfänger) an.
Ersatzweise kann das Geräte-Bedienteil unterhalb der Bildröhre aus-
gebaut und wieder angesteckt werden.
Änderungen vorbehalten
Subject to alteration
Downloaded from
www.Manualslib.com
Service
Zusätzlich erforder-
liche Unterlagen
Manual
für den
Komplettservice:
Sicherheit
Safety
Additionally
required Service
Sach-Nr./Part No.
Manuals for the
72010-800.00
Complete Service:
(9.21484-01 / G.CC 4669)
(9.21484-02 / G.CC 4769)
(9.21483-01 / G.CC 4269)
(9.21483-02 / G.CC 6769)
(9.21533-01 / G.CD 5675)
(9.21533-02 / G.CD 5775)
(9.21530-01 / G.CC 6975)
(9.21530-01 / G.CC 6924)
TP 800
(29642-061.01)
1
2
3
4
5
6
7
8
9
0
TXT
SAT
PIP
VIDEO
AUX
TP 800
manuals search engine
SERVICE MANUAL
Service
Training
Sach-Nr./Part No.
72010-350.15
Boston ST 270/8 IDTV / LOG
SE 7089 IDTV / LOG
SER 151 E
CUC 1826
ST 72-261 IDTV / LOG
ST 72-261/8 IDTV / LOG
Atlanta SE 7289 IDTV / LOG
SER 150
For dismantling the chassis, the plug-in connections to the control unit
must be disconnected in some models (72 cm TVs).
For facilitating repairs in this case, the ZKD offers a universal keyboard
control unit, part no. 29305-165.59 (consisting of the mains switch and
infrared receiver).
Alternatively, the built-in keyboard control unit can be removed from
below the picture tube and reconnected.
Printed in Germany
VK 22 0696
32700 #
Btx
*
D
CUC 1825
CUC 1826
(9.21530-02 / G.CC 1275)
(9.21543-01 / G.CC 7092)
(9.28016-4144 / G.AC 2600)
(9.21528-01 / G.CD 8869)
(9.21528-02 / G.CD 8969)
(9.21529-01 / G.CC 8224)
(9.21529-01 / G.CC 8226)
(9.28016-4143 / G.AY 4900)
Service Manual Sach-Nr.
Service Manual Part No. 72010-019.30

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Grundig CUC 1825

  • Seite 1 Service Service Service Zusätzlich erforder- Manual liche Unterlagen Manual Training für den Digi Basic / Komplettservice: Sicherheit CUC 1825 Digi Basic plus Safety Additionally required Service CUC 1826 Sach-Nr./Part No. Sach-Nr./Part No. Sach-Nr./Part No. Manuals for the 72010-019.30 72010-800.00 72010-350.15...
  • Seite 2: Service- Und Sonderfunktionen

    Allgemeiner Teil / General Section CUC 1825 / 1826 Service- und Sonderfunktionen Service and Special Functions 1. Einschaltfunktionen 1. Switching-on Options 1.1 ATS-Reset 1.1 ATS Reset Netzschalter "EIN" mit gedrückter Nahbedientaste "L+". Press and hold button "L+" on the TV and switch the mains button "ON".
  • Seite 3: Sonderfunktionen Im Dialog Center

    CUC 1825 / 1826 Allgemeiner Teil / General Section Interface Number Defective Schnitt- Anzahl fehlerhafter stelle der Clocks Baustein/ Schaltkreis of Clocks Module / Integrated Circuit S-DDC IC1410, Feature-Box S-DDC IC1410, Feature-Box IC1650, Feature-Box IC1650, Feature-Box IC1430, Feature-Box IC1430, Feature-Box Tuner (SAT or terr.)
  • Seite 4: Ton-Einstellungen Im Dialogcenter

    Allgemeiner Teil / General Section CUC 1825 / 1826 3.4 IR-Dataprogrammer 3.4 IR Data Programmer Mit Taste " " das Menü "IR-Dataprogrammer" über "Dialog Center" –> Reach the "IR-Dataprogrammer" menu via "Dialog Center" –> "Serv- "Service" aufrufen. Mit der Taste "OK" können mit dem IR-Datapro- ice"...
  • Seite 5: Einstellungen Über Die Senderkennung

    CUC 1825 / 1826 Allgemeiner Teil / General Section - "Am Tag": Vollkontrast und geänderte Weißbalance - "During the day": maximum contrast and changed white balance - "Am Abend": reduzierter Kontrast und geänderte Weißbalance - "In the evening": reduced contrast and changed white balance - "Soft": veränderte Bildschärfe, Rauschreduktion und Kontrast...
  • Seite 6 Allgemeiner Teil / General Section CUC 1825 / 1826 8. Audio-/Video-Anschlüsse 8. Audio/Video Connectors Festlegungen der Ein- Ausgangssignale an den AV-Buchsen: Assignment of the input and output signals to the AV sockets: - MegaLogic-Geräte und Decoder an Buchse AV 1.
  • Seite 7 +H 5V R61001 R61313 OK60046 Standby 1,6A SI61022 +G IC60010 +33V IC40010 IC61310 OK60031 Regelung/Control Netzteil/ R32315 Power Supply Regelverstärker/ 0,1A SI60001 Gain Control Amplifier EPROM Reset SI60201 ca.13V D61001 TR60220 EEPROM B380/2200 +Q 8,5V TR6001 IC80065 IC61006 IC80040 D60221 R61051 C600028 IC80070...
  • Seite 8: Abgleichlageplan Lötseite / Alignment Layout Solder Side

    Abgleich / Alignment CUC 1825 / 1826 Abgleich / Alignment Abgleichlageplan Lötseite / Alignment layout solder side Ton ZF und Audioverarbeitung/ NF-Endstufe/ Sound and Audio Processing Kopfhörer- AF Output Stage verstärker/ IC40020 IC32300 Headphone IC40010 IC41010 Amplifier LS-Schutz/LS Protection Tuner NF-Mute/AF Muting +5V für/for...
  • Seite 9 CUC 1825 / 1826 Abgleich / Alignment Abgleich Alle nicht beschriebenen Einstellelemente sind werkseitig abgeglichen und dürfen im Service-Fall nicht verstellt werden. 1. Chassisplatte Meßgeräte: Zweikanal-Oszilloskop, Tastkopf 10:1, Digitalvoltmeter, Farbbildgenerator Servicearbeiten nach Austausch bzw. Reparatur: - Chassis Abgl. 1.1 - Tuner, ZF-Verstärker Abgl. 1.2, 1.3, 1.4, 1.5.1 bzw. 1.5.2.
  • Seite 10 Abgleich / Alignment CUC 1825 / 1826 Abgleich Vorbereitung Abgleichvorgang 1.11 Bildgeometrie Mit Taste " " das Menü "Geometrie" über "Dialog Cen- Nacheinander über die Menüführung die Geometriewerte ter" > "Service" –> "Für den Fachhandel" –> "Kennzahl der Vertikal- danach die Einstellung der Horizontalablenkung –...
  • Seite 11: Chassis Board

    CUC 1825 / 1826 Abgleich / Alignment Alignment All adjustment controls not mentioned in this description are pre-set at the factory and must not be re-adjusted in the case of repairs. 1. Chassis Board Measuring instruments: Dual-channel oscilloscope, 10:1 test probe, digital voltmeter, colour video generator.
  • Seite 12 Abgleich / Alignment CUC 1825 / 1826 Alignment Preparations Alignment Process 1.11 Picture With button " " call up "Geometry" via "Dialog Center" –> "Service" Via the menu guide, select the geometry values for the geometry –> "for authorised dealer "–> "Code Number 8500 "–> (menu vertical deflection first, then set the values for the horizontal guide).
  • Seite 13 CUC 1825 / 1826 Platinenabbildungen und Schaltpläne / Layout of the PCBs and Circuit Diagrams Platinenabbildungen und Schaltpläne / Layout of the PCBs and Circuit Diagrams Oszillogramme / Oscillograms 500V/cm, 5µs/cm 5V/cm, 5µs/cm 1V/cm, 5µs/cm 10V/cm, 5µs/cm 2V/cm Standby Standby...
  • Seite 14 Platinenabbildungen und Schaltpläne / Layout of the PCBs and Circuit Diagrams CUC 1825 / 1826 Oszillogramme / Oscillograms 1V/cm, 20µs/cm 33 34 1V/cm, 20µs/cm 1V/cm, 20µs/cm 39 40 1V/cm, 20µs/cm 2V/cm S-VHS 1V/cm, 20µs/cm 1V/cm, 20µs/cm 47 48 49 1V/cm, 20µs/cm...
  • Seite 15 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Gesamtschaltplan Netz-Chassis / General Circuit Diagram Mains Chassis +OEKO /15V D61001 IC61001...
  • Seite 16 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Gesamtschaltplan Netz-Chassis / General Circuit Diagram Mains Chassis ZUM COLOR CHASSIS TO COLOUR CHASSIS...
  • Seite 17 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Gesamtschaltplan Signal-Chassis / General Circuit Diagram Signal Chassis R32357 L32342 D32356 D32357...
  • Seite 18 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Gesamtschaltplan Signal-Chassis / General Circuit Diagram Signal Chassis CBR054 CBR044 CBR036 CBR045...
  • Seite 19 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Bedieneinheit / Control Unit 29501-082.43 Bedieneinheit / Control Unit 29501-082.44 BEDIENEINHEIT 29501-082.44 BEDIENEINHEIT 29501-082.43...
  • Seite 20 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Bedieneinheit / Control Unit 29501-082.37/.46 Bedieneinheit / Control Unit 29501-082.25/.28 BEDIENEINHEIT 29501-082.25 BEDIENEINHEIT 29501-082.37/46...
  • Seite 21 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Bildrohrplatte / CRT Panel 29305-122.04/.10 Bestückungsseite, Ansicht von oben Component side, top view...
  • Seite 22 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Tuner 29504-201.21 CC2039 TUNER 29504-201.21 +12V CC2037 CC2194 CC2182 CC2081 L2033 L2062...
  • Seite 23 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Signal-Baustein / Signal Module 29504-102.34 SIGNAL-BAUSTEIN 29504-102.34 SIGNAL MODULE MODULE SIGNAL MODULO SEGNALE...
  • Seite 24 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Signal-Baustein / Signal Module 29504-162.34 SIGNAL-BAUSTEIN 29504-162.34 MULTI SIGNAL MODULE MODULE SIGNAL...
  • Seite 25 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Feature-Box 29504-103.37 L1312 2,2u CT1312 CC1303 CC1306 BCX51-16 CR1312 CR2000 D-Y7 56p/5%...
  • Seite 26 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs Feature-Box 29504-103.37 FEATURE-BOX 29504-103.37 L1509 2,2u CT1506 BCX51-16 CR1506 CT1501 BC849B 100/2%...
  • Seite 27 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 SAT-Baustein / SAT Module 29504-106.24 SAT-BAUSTEIN 29504-106.24 SAT. MODULE MOD. SAT. MOD. SATELITTE SAT.
  • Seite 28 CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs CUC 1825 / 1826 Schaltpläne und Druckplattenabbildungen / Circuit Diagrams and Layout of PCBs SAT-Baustein / SAT Module 29504-106.24 CT3982 MP36 BC858B +5V/2 +5V/1 +12V CR3991...
  • Seite 29 SERVICE MANUAL SERVICE MANUAL 72010-350.15 SERVICE TRAINING SERVICE TRAINING 29701-096.03 CHASSIS-FS DIGI-BASIC .01 CHASSIS TV DIGI BASIC .01 CUC 1825 CUC 1825 KEIN E-TEIL NO SPARE PART 29701-096.04 CHASSIS-FS DIGI-BASIC .02 CHASSIS TV DIGI BASIC .02 CUC 1825 CUC 1825...

Diese Anleitung auch für:

Cuc 1826

Inhaltsverzeichnis