Manual Connection - Grundig Chassis G5 Serviceanleitung

NETWORK SETUP
-------------------------------------------------------------------------------------------
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
10 Select the required character with » «,
V
< >
» Λ «, » « or » « and move to the next
character with »OK«.
– Using »Shift« »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
11
Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
12 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
13 Press »EXIT« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
92 ENGLISH

Manual connection

Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with » «, » «,
V Λ
< >
» « or » « and press »OK« to confirm.
>
3 Select the menu item »Network« with » « or
<
» « and press » V « to confirm.
– »Network« menu is active.
4 Select the line »Change Connection Type«
with » « or » « and press »OK« to
V Λ
confirm.
<
5 Select the option »Wireless« with » « or
>
» « and press »OK« to confirm.
– WiFi warning screen will be displayed.
6 Confirm the message »Do you want to turn
< >
on Wi-Fi?« select »Yes« with » « or » « and
press »OK« to confirm.
7 Select the line »Network Configuration«
with » V « or » Λ « and select the option
< >
»Manual« with » « or » «.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Settings > Network Tuesday
xx xxx xxxx
Picture Sound Source TV Network Timer
Change Connection Type Wired
WiFi On
Select Access Point N/A
Network Configuration Manual
Wake-on-LAN Off
IP Address 192 . 168 . 000 . 200
Connect Test Connection Change Area Input Mode BACK Back EXIT Exit
8
Select the line »IP Address« with » V «.
Enter IP address with »1...0«.
9 Select the line »DNS« with » V «.
Enter DNS address with »1...0«.
10 Select the line »Netmask« with » «.
V
Enter Netmask address with »1...0«.
NETWORK SETUP
-------------------------------------------------------------------------------------------
11
Select the line »Gateway« with » V «.
Enter Gateway address with »1...0«.
12 Select the line »Select Access Point« with
» « or » « and press »OK« to confirm.
Λ V
– »Select Access Point« menu is displayed
by scanning available wireless networks.
13
Select the network that you want to connect
with » « or » « and confirm with »OK«.
V Λ
– Wireless connection password screen is
displayed.
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
14 Select the required character with » V «,
< >
» «, » « or » « and move to the next
Λ
character with »OK«.
– Using »Shift« »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
15 Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
16
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
17 Press »EXIT« to end the setting.
Change TV Name
To make it possible to identify your TV in the net-
work, the name "Inter@ctive TV 4.0" is assigned
at the factory. You can change the name.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with » «, » «,
V Λ
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »TV« with » « or » «
V Λ
and press » V « to confirm.
– »TV« menu is active.
4 Select the line »About« with » V « or » Λ «
and press »OK« to confirm.
5 Select the line »TV Name« with » « or
V
» « and press »OK« to confirm
Λ
6 Delete the current name step-by-step with
» « (red).
7 Select the required character with » «,
V
< >
» Λ «, » « or » « and move to the next
character with »OK«.
– Using »Shift« »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
8
Confirm the new name by pressing » «
(green).
9 Press »EXIT« to end the setting.
ENGLISH 93