Reset Functions - Grundig Chassis G5 Serviceanleitung

RESET FUNCTIONS

----------------------------------------------------------------------------------------
1 Open menu with »MENU« button.
2 Select menu item »Settings« with » V «, » Λ «,
< >
» « or » « and press »OK« to confirm.
> <
3 Select the menu item »TV« with » « or » «
and press »OK« to confirm.
4 Select the line »About« with » « or » «
V Λ
and press »OK« to confirm.
Settings > TV > About Tuesday
xx xxx xxxx
Picture Sound Source TV Network Timer Parental
Product Info
TV Name Smart Inter@ctive 4...
Software Updates
Restore Factory Defaults
Reset Chanel History
Country Other
Change Area Select Back Exit
BACK EXIT
Note:
Additional operations are explained in the
7
following sections.
Resetting the television to its
original state
This function enables you to delete the station
lists and all custom settings.
1 From the »About« menu use » « or » «
V Λ
to select the line »Restore Factory Defaults«
and press »OK« to confirm.
– Warning screen will be displayed.
Note:
If the loaded applications are also to be
7
deleted, select the line »Save installed
applications« by pressing » Λ « and remove
the small tick with »OK«.
< >
2
Select push button »Yes« with » « or » « to
confirm the security query;
or
< >
select push button »No« with » « or » « to
cancel deletion process.
– In a short while »Installation Guide« is
displayed.
3 Continue the settings as described in the
chapter on first installation and searching
for channels on page 20.
76 ENGLISH
Deleting channel history
This function allows you to delete channel his-
tory stored in the Main menu.
1 From the »About« menu use » « or » « to
V Λ
select the line »Reset Channel History« and
press »OK« to confirm.
– Warning screen will be displayed.
< >
2 Select push button »Yes« with » « or » « to
confirm the security query;
or
< >
select push button »No« with » « or » « to
to cancel the function.
»BACK <
3 Press « to go back one menu
level or press »EXIT« to end the setting.
NETWORK SETUP
-------------------------------------------------------------------------------------------
Wired network settings
There are two ways of making the wired net-
work settings.
A
Automatic connection,
All data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
1 Open the menu with »MENU«.
2
Select menu item »Settings« with » V «, » Λ «,
< >
» « or » « and press »OK« to confirm.
>
3 Select the menu item »Network« with » « or
<
» « and press » « to confirm.
V
– »Network« menu is active.
Settings > Network Tuesday
xx xxx xxxx
Picture Sound Source TV Network Timer Parental
Change Connection Type Wired
Network Configuration AUTO
Wake-on-LAN Off
Advanced
Connect Test Connection Change Area Select BACK Zurück
4 Select the line »Change Connection Type«
» V « or » Λ « and press »OK« to confirm.
5
Select the option »Wired« with » V « or » Λ «
and press »OK« to confirm.
6
Select the line »Network Configuration«
< >
with » V « or » Λ « and use » « or » « to
select »AUTO«.
7 With » « (red) select »Connect« to establish
modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9 Press »EXIT« to end the settings.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
ENGLISH 87