Grundig Chassis G5 Serviceanleitung Seite 31

INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Changing the Channel Editor for
the digital channels
Channels found at the end of the search are
stored in the »Channel Editor«.
You can delete channels which are not required
from the programe table, you can change the
order of channels within the programe table and
lock individual channels (Parental control).
You can also add channels to the favourites list;
in addition, you can change the order of chan-
nels within the favourites list.
In Channel Editor, press »P+« to switch the
channel list to the next page, press »P–« to
switch it back to the previous page.
To perform searching in the Channel Editor
menu by Channel names, press » « (red).
To use filters and tools in the Channel Editor
menu, press » « (yellow).
1 Das Erste
Channel Editor
1 Das Erste 2 ZDF 3 SAT1
DTV DTV DTV
6 24 7 HD Sports 8 HD Test
DTV DTV DTV
11 HD1 12 Life 13 Film
DTV DTV DTV
16 TV Sport 17 SAT8 18 SKY
DTV DTV DTV
Search for Channels Antenna Type Tools Tune Channel
Opening the Programme Table
1 Open the menu with »MENU«.
2 Select the »Settings« menu with » «, » «,
V Λ
< >
» « or » « and press »OK« to confirm.
> <
3 Select the option »Source« with » « or » «
and press » V « to confirm.
4 Select the line »Channel Editor« with » «
V
and press »OK« to confirm.
– »Channel Editor« menu is displayed.
Important:
Programme table and favourite lists are
7
stored separately for all sources (satellite,
cable and air).
Programme table of the current source will
7
be displayed when you select programme
table.
Notes:
A Cl module and smart card is required to
7
watch the channel if there is a » « sign
next to the channel name in Programme
Table.
As the recorded data channels are not
7
displayed in the channel list, number of
channels displayed in the Channel list may
be less than 6000
Tuesday
xx xxx xxxx
Satellite All
4 N24 5 SAT3
DTV DTV
8 SAT 10 RTL
DTV DTV
12 Promo 15 Sport1
DTV DTV
19 TV6 20 TV5
DTV DTV
Select
ENGLISH 23
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Searching channels by name in the
Channel Editor
While arranging the channels in the Channel
Editor, you can search and select the channel
name by the first three characters.
1
In the »Channel Editor« menu, select the
search mode by pressing » « (red).
2 Select the first character of the channel
name you want to search with » «, » «,
V Λ
< >
» « or » « and press »OK« to confirm.
Repeat the entry for the next characters.
– Channels found will be listed on the right
side of the screen.
>
3
With » « switch to result section, select the
channel you are searching with » V « or
» «, and highlight this with »OK«.
Λ
Note:
To change the place of, delete or add the
7
channels to favorites lists, continue reading
the relevant section.
4 To return to the previous menu, press
»BACK <
«.
5 To exit the »Channel Editor« menu, press
»EXIT«.
Deleting channels in the Channel
Editor
1 In the »Channel Editor« menu, select the
channel(s) you want to delete with » V «,
< >
» «, » « or » «, and highlight the channel
Λ
by pressing »OK«.
– Channel is marked with » «.
2 Press » « (yellow).
– »Tools« menu is displayed.
3 Select the line »Delete« with » V « or » Λ «
and press »OK« to confirm.
4 To confirm deletion process, select the op-
< >
tion »OK« with » « or » «;
or
to cancel deletion process, select the option
< >
»No« with » « or » « and press »OK« to
confirm.
5
To exit the »Channel Editor« menu, press
»EXIT«.
24 ENGLISH
Moving the channels in the channel or-
ganizer to different channel positions
1
In the »Channel Editor« menu, select the
channel(s) you want to move with » «,
V
< >
» «, » « or » «, and highlight the televi-
Λ
sion channel by pressing »OK«.
– Channel is marked with » «.
2 Press » « (green).
Notes:
In case of changing the order of the chan-
7
nels, channel numbers sent by the broad-
caster will be changed.
If more than one channel is selected for
7
moving, channels will be moved one after
the other according to the selection order of
channels.
3 Select the new place of the channel with
< >
» «, » «, » « or » « and press »OK« to
V Λ
confirm.
4
To exit the »Channel Editor« menu, press
»EXIT«.
Displaying channels in the Channel
Editor by antenna type
If you have more than one antenna type, you
can display channels in the Channel Editor by
antenna type.
1 To display the channels in the »Channel
Editor« menu by antenna type, press » «
(yellow).
2
Confirm »Antenna Type« with »OK«.
3 Select »Air«, »Cable« or »Satellite« with
» V « or » Λ « and press »OK«.
– Television will switch to the antenna sys-
tem you have selected and channels will
be displayed.
4
To exit the »Channel Editor« menu, press
»EXIT«.