Grundig Chassis G5 Serviceanleitung Seite 30

INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Searching television channels with sat-
ellite signal (DVB-S)
25
Select the option »Satellite (DVB-S/S2)«
with » « or » « and press »OK« to
V Λ
confirm.
– The satellite Astra 19.2° East is preset.
26
Confirm the push button »Continue« with
» « (blue).
Notes:
Select the Channel Type.
7
Press » V « or » Λ « to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
Select Scan Mode.
7
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press » « or » « and press »OK« to
V Λ
select and mark or unmark the »Free« and/
or »Scrambled« items.
27 Press » « (red) to start searching.
– »Digital Searching« menu appears and
the scan for TV channels begins.
– The scan is complete as soon as the mes-
sage »Search is completed!« appears.
28 Select the »Channel Editor« with »OK«.
Tuning cable digital television channels
(DVB-C)
29
Select the option »Cable (DVB-C)« with
» « or » « and press »OK« to confirm.
V Λ
30 Select the line »Scan Type« with » V « or
» «.
Λ
<
Select the option »Quick« or »Full« with » «
>
or » «.
– »Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
– »Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet
forums.
31 Confirm the push button »Continue« with
» « (blue).
Note:
Perform Channel Type selection. Press
7
» V « or » Λ « to select whether you want to
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to se-
lect and mark or unmark the »Digital« and
»Analog« items.
32 Press » « (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
33
Select the »Channel Editor« with »OK«.
ENGLISH 21
INITIAL SET-UP
---------------------------------------------------------------------------------------------------
Tuning terrestrial digital television
channels (DVB-T)
34
Select the option »Air (DVB-T/T2)« with
» « or » « and press »OK« to confirm.
V Λ
Important:
The antenna power supply (5V ) may
7
only be switched on if the antenna is an
active indoor antenna with a signal
amplifier and it is not already supplied with
a voltage via a mains plug (or similar
supply). Otherwise you may cause a short
circuit and irreparably damage your
antenna.
35
Select the line »Active Antenna Power« with
» V « or » Λ «.
Switch on the antenna power supply for the
< >
antenna with » « or » « (»On«).
36
Select the line »Next Page« with » V « or
» Λ « and press »OK« to confirm.
Note:
Perform Channel Type selection. Press
7
» V « or » Λ « to select whether you want to
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to se-
lect and mark or unmark the »Digital« and
»Analog« items.
37 Press » « (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
38
Select the »Channel Editor« with »OK«.
22 ENGLISH