Conformity To Standards; Designated Use - Stahl 8225 Betriebsanleitung

Designated Use

3.3 Conformity to Standards

The Ex d enclosures comply with the following regulations and standards:
Directive 94/9/EC
X
IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7
X
IEC/EN 61241-0, IEC/EN 61241-1
X
4 Designated Use
The empty enclosure type 8225/...-... is a welded sheet steel construction with aluminium
or bronze screw cap. It is used for housing switching, control, measuring and display
devices. Cover and side walls can be equipped with control axles and/or viewing panes.It
is connected via flameproof built-in cable bushings or cable bushings with terminal
compartment in the type of protection "increased safety e" or via direct cable entries or
conduit systems.The empty enclosures can be combined with one another and/or with
connection boxes of type of protection "increased safety e".
Only use the device for its intended purpose!
Otherwise, the manufacturer's liability and warranty expire.
Only use the device under the operating conditions described in the operating
instructions.
The device must only be used in areas subject to explosion hazards according to
these operating instructions.
4
Ex d Enclosure System in Sheet Steel /
Flameproof Enclosure 8225
WARNING
168731 / 8225602300
2010-04-21·BA00·III·en·00