Herunterladen Diese Seite drucken

ZEITRAUM ECLAIR Aufbauanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ECLAIR
assembly instruction 02/2021
Tools:
Allen screw SW4 and SW5 (enclosed), crosstip screwdriver
4 x XS steel plug
8 x XS steel plug
12 x connector housings
24 x confirmat screws
8 x confirmat screws (M6x70)
1
2
1 Crossbars
4 Base- and Headboard
2 Bed- and center feed
5 Headboard with upholstery hole
3 Long sides
6 Middle plank and holding strips
long side
2. Mount the lateral support strips (6) on the
long sides (3) using the confirmat screws.
5. Place the bed on its feet. Insert the cushions between
the head rails. Then insert the center support bar (6) and
screw it in place.
ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · info@zeitraum-moebel.de · www.zeitraum-moebel.de
12 x grub screws
3 x countersunk bolts (M8x50)
3 x center feet adjustable
4 x mounting blocks
4 x countersunk bolts (M6x50)
Please do the setup of the bed on a soft surface(e.g. a carpet or blanket) to avoid damages.
5
4
6
3
1. Screw all XS bolts into the long sides (3) and insert the connector housings into
the foot-, head sections (4) and crossbars (1). Align bolts and housing correctly! Place
base- / head- (4) and headboard with upholstery hole (5) on the long sides and fix with
grub screws.
3. Now place the two bed feet (2) on the crossbars
(1) and mount them on the long side (3). Then attach
the second long side and fix it in place.
6. Screw the center feet (2) into the center bar (6) using the countersunk screws. Observe
the correct length. Finally, fix the cushion.
Bitte beachten Sie die Funktionsweise der Beschläge:
https://www.youtube.com/watch?v=ioIUTDqtvgE
8
9
1
2
3
4
5
6
7
4
6
7
4. Attach the mounting blocks to the bottom
of the cushion.
5
9

Werbung

loading