Using The Usb Port; Technical Data - Formula 1 HI700 Originalbetriebsanleitung

4. Set the toggle switch (6) to „0" to switch off
the compressor.
5. Remove the air hose from the item's valve and
close the valve cover on the item.
Non-binding pressure guidelines
Object Pressure
Automotive tyre approx. 1.9 - 3.5 bar
Trailer tyre approx. 2.4 - 3.4 bar
Motorcycle tyre approx. 1.7 - 2.9 bar
Bicycle tyre approx. 2.0 - 4.0 bar
Football approx. 0.6 - 1.1 bar
Attention!
Observe the specifications of the manufacturer of
the product. Do not use the compressor to inflate
flotation devices!
Technic al data
Model HI700
Item number 10782
Input Battery pack: 20 VDC
Car connecting cable:
12 VDC
Compressor output max. 11.0 bar / 160 psi /
1100 kPa
Pressure indicator Digital pressure readout,
not calibrated, with
backlight
Accuracy ± 0.07 bar at 2.4 bar /
± 1 psi at 35 psi
Operating mode periodic duty (manual),
maximum operating time
10 min.
Sound pressure level 71.2 dB(A) / 3.0 dB(A)
/ K
L
PA PA
Sound power level 82,2 dB (A) / 3,0 dB (A)
L / K
WA WA
Generator set oil-free

Using the USB port

1. Open the rubber cover on the USB port (8).
2. Plug an external USB device into the USB port
(8).
The USB port delivers 5 V of direct current for
external USB devices (e.g. lamps, fans, radios).
Note:
•
The USB port is not intended for data transfer.
•
Do not connect memory sticks, MP3 player or
similar data storage external appliances.
Model HI700
High-pressure hose 76 cm ±1 cm
Air hose 46 cm ±1 cm
12 V car connecting 200 cm ±1 cm
cable
Output USB: 5.0 V DC
Output voltage USB: 2.0 A
Lighting type 4 LED lights, not replace-
able
Ambient temperature 0 °C ~ +40 ºC
Storage temperature -15 °C ~ +40 °C
Protection class Class III
Compatible battery LB200 2 Ah (10785)
packs LB400 4 Ah (10786)
Compatible charger BC400 (10784)
Fuse F5AL glass fuse, max. 15 A
Hybrid Inflator HI700
EN
17