iRoom iO touchDock Bedienungsanleitung Seite 12

4. Attach the glass panel to the
Aluminum arm on the docking
station and secure with the 4
flat head screws M3 x 6.
Important Note:
Do not over-tighten the
screws to avoid breaking the
glass panel.
5. Connect the other end of the
keypad control cable to the
connector on the magnetic
glass frame.
intelligence. on.
6. Attach the magentic glass
frame to the aluminum frame.
The magnets will hold the
glass frame.
7. Connect power AC or PoE+
power source to boot
the docking station and
proceed with setting up your
touchDock using the iOS App
„iRoom's iDock"
Page 12