Herunterladen Inhalt Inhalt Diese Seite drucken

Shutting Down - Parkside PUV 1100 A1 Originalbetriebsanleitung

Thermischer unkrautvernichter
Vorschau ausblenden Andere Handbücher für PUV 1100 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTE
This appliance is particularly suitable for
removing weeds.
Weed killing is most effective at an early
stage of vegetation growth.
The most suitable time is during spring.
The treatment is at its most intensive, the
younger the plant is. However, the success
of the treatment is not immediately visible.
The visible section of the plant can also be
burnt off with a longer exposure time/treat-
ment.
Plants do not react immediately to the heat
with the recommended treatment time.
The basic rule is:
young, soft-leaved plants are most sensitive to
the treatment. Afterwards, they are incapable
of survival.
Older plants with hard leaves, such as this-
tles, must be treated more frequently at an
interval of 1 to 2 weeks to dry out.
Winter-green grasses are extremely robust
and require longer treatment.
Initially, overgrown areas must be treated
several times at short intervals in order to
produce long-term success. Later on, treat-
ment at longer intervals is sufficient.
Burning the plants off completely is not essen-
tial. During heating, the leaf cells dry out and
the weed will die.
Repeated treatment of certain types of weed
may be necessary.
PUV 1100 A1

Shutting down

Switch the appliance just let go of the ON/OFF
switch 1.
Disconnect the appliance from the power
supply.
Close the protective cover 0 by lifting the
lever 7 from below with your foot. Tip the
appliance backwards slightly to make it easier
to close the protective cover 0.
The protective cover 0 closes.
After use, always park the appliance on a flat,
fireproof surface until the hot parts of the appli-
ance have cooled down.
After use, the protective cover 0 and the
heating element 9 remain very hot for some
time.
Allow the appliance to cool down for about
20 minutes. Do not leave the appliance unat-
tended during this cool-down phase.
GB │ MT
 31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis