Appliance-Specific Safety Instructions - Parkside PUV 1100 A1 Originalbetriebsanleitung

To avoid damage and risks due to
■
improper use, observe the oper-
ating instructions and store them in
a safe place!
If you pass the appliance on to
■
someone else, please also pass on
the operating instructions.
NOTE
Spare parts not listed (such as
►
switches) can be ordered via our
call centre.
Appliance-specific safety
instructions
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, its customer
service department or a similarly
qualified person.
The mains voltage must match the
■
voltage specification (V) on the
appliance!
Connect the appliance only to a
■
(Schuko) safety socket supplying
alternating current.
When using an extension cable,
■
use only an earthed cable suitable
for outdoor use!
│ GB │ MT
■ 28
Additional protection is provided by
■
the installation of a residual current
device with a rated tripping current
of no more than 30 mA.
Careless use of the appliance can
■
cause a fire.
CAUTION! Remove the plug
■
from the mains power socket imme-
diately:
in the event of malfunctions
–
during operation
before each cleaning
–
during breaks in work
–
after use
–
Take care when using the appliance
■
near flammable materials.
Do not use in the presence of an
■
explosive atmosphere.
Do not operate the appliance for
■
too long on the same spot. Pull it
slowly towards you.
Heat can be transferred to combus-
■
tible materials which are hidden
from view.
Use the appliance outside only.
■
Never use the appliance in a
■
garage or in places where petrol or
highly flammable substances may
be stored.
PUV 1100 A1