CardiAid CT0207RS Benutzerhandbuch Seite 32

Guidelines and manufacturer declaration – Electromagnetic emissions
CardiAid is intended for operation in the electromagnetic environment specified below.
The customer or user of the device or system should make sure that it is operated in such an environment.
HF emissions according to CISPR 11
HF emissions according to CISPR 11
Emissions of voltage fluctuations/flicker
according to IEC 61000-3-2
Emissions of voltage fluctuations/flicker
according to IEC 61000-3-3
Recommended safety distances between portable and mobile telecommunication devices
(e.g. mobile telephones) and the measuring device
Power rating of the HF-device in W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres
(m) can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE: At 80 MHz and 800 MHz, higher frequency field is applicable.
NOTE: At 80 MHz and 800 MHz the separation distance for the higher frequency range is applicable.
NOTE : These guidelines may not apply in all situations. Electromagnetic transmission is affected by absorption of and
reflection from structures, objects and people.
Group 1 CardiAid uses HF energy only for its internal functions. For
this reason, its HF emissions are very low and it is not likely
that it will interfere with neighbouring electronic devices.
Class B CardiAid is suitable for use in all establishments, including
residential establishments with similar purposes, which
N.A.
are directly connected to a public power supply, which also
supplies buildings used for residential purposes.
N.A.
Safety distance depending on transmission frequency in m
150 kHz – 80 MHz 80 MHz – 800 MHz
0.12 0.12
0.37 0.37
1,17 1.17
3,69 3,69
11,67 11,67
12. Technical Information
800 MHz – 2,5 GHz
0.23
0.74
2,33
7,38
23,33
31