CardiAid CT0207RS Benutzerhandbuch Seite 25

7. Troubleshooting
Failure Messages of CardiAid
Visual
Status indicators
do not light or flash
None
for a period of time
during operation.
OK Symbol
is lighting
continuously during
operation.
Repair symbol
is lighting
continuously.
No visual message No acoustic message
None
CardiAid cannot be switched on.
Any
Any
Shock cannot be delivered, even though
shock button is flashing.
Any
Any
The device is not operating as indicated in
the operating manual.
24
Cause
Acoustic
Any Problem with LEDs.
Electrodes are not placed
correctly.
"Stick electrodes on
the patient's bare
chest" even though
Electrodes are defective.
the electrodes are
placed.
There is a malfunction with
the device.
"Device is not ready There is a malfunction with
for use." the device.
There is a malfunction with
the device.
Verbal instructions
There is a malfunction with
cannot be heard while
the device.
CardiAid is operating.
Any
There is a malfunction with
the device.
Any
Any
Action
CardiAid can be used only in
emergencies. Contact Cardia
International or an authorized
service provider immediately.
Press the electrodes firmly.
Be sure that the chest is dry
and not very hairy. Remove
excessive hair, if necessary.
Change electrodes.
Contact Cardia International or
an authorized service provider
immediately.
Contact Cardia International or
an authorized service provider
immediately.
Close the cover and open the
cover again. If the problem
persists, contact Cardia
International or an authorized
service provider immediately.
Contact Cardia International or
an authorized service provider
immediately.
Contact Cardia International or
an authorized service provider
immediately.
Contact Cardia International or
an authorized service provider
immediately.