Laserworld CS-1000RGB Bedienungsanleitung Seite 13

Laserworld CS-1000RGB
Confirm with „Enter".
Safety Setting
The „bEAu" menu can switch the beam block safety on and off. The beam block safety prevents
that very intense, single beams can be displayed. It is highly recommended to not switch this
feature off. Switching off the beam block safety is at your own risk! Lasers with switched off beam
block safety may only be used in safe areas.
Always respect the local laws!
Press „Enter" to change the settings. Use the „Up" / „Down" button to change the selection.
Confirm with „Enter".
Orientation Setting
The „InvE" menue controls the orientation of the projection. You can invert the projection and flip it
to match the orientation of the laser with the content.
Press „Enter" to change the settings. A test picture is shown to represent the currently set orientati-
on. Use the „Up" / „Down" button to change the selection, and confirm the selection with „Enter" to
change the test picture projection
13 / 45