Environmental Protection - Fein ASzxeu 636-1 Kinetik Bedienungsanleitung

ASzxeu 636-1 - Buch Seite 11 Dienstag, 26. September 2000 5:40 17
ASzxeu 636-1 Kinetik
Cleaning and care.
!
Risk of injury
by switching the tool ON unintentionally.
Before cleaning, pull out the mains plug.
Carry out the following once a week, or
more often if the power tool is used more
frequently:
Clean the venting openings.
Blow out the motor space from outside
with dry compressed air.
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ized service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Upon request a repair manual is sent to
the electrical engineers.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), order no. (2) as well as
the number of spare parts (3) facilitates
the ordering procedure.
Accessories.
Illustrations and order numbers can be
found at the end of these instructions.
Description of the accessories:
A Ring gear drill chuck with drill chuck
spanner. For drill bits with a diameter
of 0.5 – 8 mm.
B Ring gear drill chuck with drill chuck
spanner. For drill bits with a diameter
of 0.8 – 10 mm.
C Metal carry case
(390 x 240 x 110 mm).
Guarantee.
FEIN power tools are guaranteed in
accordance with statutory and national
regulations (evidence of purchase by
invoice or delivery note).
Damage caused by improper handling,
overload or normal wear shall be
excluded from the guarantee.
Please contact our customer service
(repair centre), FEIN authorized service
centres or agencies.

Environmental protection.

Packaging, worn out power tools and
accessories should be recycled.
Further information is available from your
dealer.
EN
11